Doran Buying Guide · Doran Pc400

    Doran Pc400 02LFT Stainless Steel Scale 2LBX0 002 LB NTEP Review & Buying Guide

    The Doran Pc400 02LFT Stainless Steel Scale 2LBX0 002 LB NTEP is a Doran weighing scale rated to 2 lb. This guide covers its specifications, how this class of instrument works, how to choose capacity and resolution, calibration practice, and where to buy it in the USA.

    🇺🇸 BUY FROM THE USA Doran Pc400 02LFT Stainless Steel Scale 2LBX0 002 LB NTEP — official product photo

    The Doran Pc400 02LFT Stainless Steel Scale 2LBX0 002 LB NTEP is a Doran weighing scale with a 2 lb capacity. This guide explains what the Doran Pc400 measures, how this class of instrument works, how to match capacity and resolution to your application, what calibration it needs, and where to buy it in the United States.

    Doran Pc400 specifications

    ManufacturerDoran
    ModelDoran Pc400
    Instrument classWeighing scale
    Capacity2 lb
    AvailabilityIn stock — ships from the USA
    WarrantyFull Doran manufacturer warranty
    Calibration serviceNIST-traceable, Cypress TX facility

    What is a weighing scale?

    Doran Pc400 is a weighing instrument for professional use. It is rated to 2 lb. Choosing a scale comes down to three numbers — capacity, readability, and division count — plus the environment it must survive in.

    How a weighing scale works

    Nearly all modern scales convert force into an electrical signal. Industrial and bench models use strain-gauge load cells, in which bonded foil gauges change resistance as a machined steel or aluminium element deforms under load. Laboratory balances use electromagnetic force restoration, which measures the current needed to hold the pan at a fixed null position and so avoids relying on mechanical deformation at all.

    Doran Pc400 capacity in other units

    Capacity is quoted as 2 lb. The same capacity expressed in the units buyers commonly work in:

    Grams (g)907.185
    Kilograms (kg)0.9072
    Pounds (lb)2
    Ounces (oz)32
    Troy ounces (ozt)29.167
    Carats (ct)4,535.9

    How to choose: what actually matters on a weighing scale

    These are the specifications that change the outcome of a purchase, in the order they should be evaluated.

    • Capacity including tare. Add the container, fixture, or packaging weight to the heaviest item you will weigh.
    • Readability against your tolerance. Choose readability at least ten times finer than the smallest difference you need to detect.
    • Division count. Capacity ÷ readability. Higher is better and is the clearest single indicator of a scale's internal quality.
    • Legal for trade. NTEP certification is required whenever weight determines price in US commerce.
    • Environment. Match the IP rating to washdown, dust, and outdoor exposure; sealed stainless cells cost more and last far longer in wet areas.
    • Data output. RS-232, USB, or Ethernet output removes manual transcription and is usually required for audited processes.

    Getting accurate results from the Doran Pc400

    Most complaints about scale accuracy are traceable to installation and procedure rather than to the instrument. The following practices apply directly to the Doran Pc400.

    • Calibrate on installation, after any move, and on a documented interval thereafter.
    • Use a certified test weight whose tolerance is no more than one third of the scale's smallest division.
    • Keep the instrument level, clean, and away from airflow and vibration.
    • Re-zero before each weighing rather than relying on a stale tare.
    • Readability (also written as d, or the display division) is the smallest change in mass the display can show. It is not the same as accuracy: a balance reading to 0.01 g may still carry a linearity error of ±0.02 g. Accuracy is bounded by readability, repeatability (standard deviation of repeated loads), and linearity combined.

    Where the Doran Pc400 is used

    • Laboratory and quality-control measurement
    • Manufacturing, batching, and inventory control
    • Shipping, receiving, and logistics
    • Retail and food service
    • Field and service work

    Calibration and verification requirements

    Every weighing instrument drifts. Span error grows with load, zero drifts with temperature, and mechanical wear changes both. Two separate activities keep a scale trustworthy:

    • Verification — placing a certified test weight on the scale and recording the reading, without changing anything. This is a check, and it is the record an auditor wants to see.
    • Calibration (adjustment) — correcting the instrument's span so it reads the certified value. This should be done by a qualified technician with traceable standards and documented afterwards.

    Guidance in NIST Handbook 105-1 is that the test weight's tolerance should be no more than one third of the scale's smallest division; many quality systems tighten that to one tenth. In practice that means an ASTM Class 1 weight for balances reading to 0.001 g, Class 2 for 0.01 g, and Class 4 or 6 for industrial platform and crane scales. Typical intervals are annual for general industrial use, semi-annual or quarterly under ISO 9001 or GMP, and immediately after any move, overload, or suspected impact.

    Certified calibration and repair for the Doran Pc400 is available through our calibration service and repair service, and locally in Texas through Houston scale services.

    Is the Doran Pc400 legal for trade?

    In the United States, a scale used to determine the price a customer pays must be certified under the National Type Evaluation Program (NTEP) and sealed by the state or local weights-and-measures authority. NTEP evaluates a device against NIST Handbook 44 and assigns an accuracy class — Class I and II for laboratory and jewelry work, Class III for retail and general commercial weighing, Class IIII for coarse industrial use. Laboratory accuracy on its own does not make an instrument legal for trade, and a certified instrument loses legal standing if the seal is broken or the device is moved without re-verification. If weight determines money changing hands in your operation, confirm the NTEP Certificate of Conformance number before you buy.

    Where to buy the Doran Pc400 in the USA

    The Doran Pc400 02LFT Stainless Steel Scale 2LBX0 002 LB NTEP is stocked in the United States by MNM Scales, a specialty weighing-systems dealer operating since 1998 out of Cypress, Texas. Buying from a scale specialist rather than a general marketplace matters for three concrete reasons on precision equipment:

    • Calibration on arrival. A scale shipped without a pre-delivery check frequently needs adjustment out of the box, especially after air freight.
    • Warranty registration. The manufacturer warranty is registered in the buyer's name, which matters if a load cell fails in year two.
    • Service capability. Repair and recertification happen in-house rather than through a return-to-manufacturer cycle.

    Our sister operations cover the same catalog: MNM Scales for the full multi-brand range and AllscalesUSA for nationwide sales and service. Both ship free to the mainland USA.

    Frequently asked questions

    What is the capacity and readability of the Doran Pc400?

    The Doran Pc400 is rated to 2 lb. Remember to subtract the weight of any container from capacity when planning your usable range.

    What is the difference between readability and accuracy on the Doran Pc400?

    Readability is the smallest increment the display can show. Accuracy is how close the reading is to true mass, and it is limited by three things together: readability, repeatability (the standard deviation of repeated identical loads), and linearity (deviation from a straight line across the range). A scale can display one more digit than it can reliably guarantee, so the specification sheet's repeatability and linearity figures matter as much as the readability number.

    What test weight should be used to calibrate the Doran Pc400?

    Use a certified weight at or near full capacity, with a tolerance no greater than one third of the scale's smallest division. For laboratory resolutions that means ASTM E617 Class 1 or Class 2; for industrial platform and crane scales, Class 4 or Class 6 is standard. Verifying only at low load cannot detect span error, because span error is proportional to the load applied.

    How often should the Doran Pc400 be calibrated?

    Annually for general commercial and industrial use; semi-annually or quarterly where ISO 9001, GMP, HACCP, or a customer specification requires it; and immediately after any relocation, suspected overload, or impact. Legal-for-trade devices additionally follow the inspection cycle set by the local weights-and-measures jurisdiction, which is usually annual.

    Does the Doran Pc400 come with a warranty, and is it in stock?

    Yes. Units are supplied new with the full Doran manufacturer warranty registered in the buyer's name, and the Doran Pc400 is currently in stock for shipment within the mainland USA. Check current pricing and stock for the Doran Pc400.

    Can the Doran Pc400 be repaired rather than replaced?

    In most cases yes. The common failure points on this class of instrument are the load cell, the keypad membrane, the display ribbon, and the power supply — all replaceable. Repair is generally worthwhile when the instrument's replacement cost is high relative to the repair, and every repair should be followed by a full recalibration and a new certificate.

    Summary

    The Doran Pc400 02LFT Stainless Steel Scale 2LBX0 002 LB NTEP is a Doran weighing scale rated to 2 lb. Match capacity to your heaviest load plus its container, choose readability at least ten times finer than the smallest difference you need to detect, verify with a certified weight on a documented interval, and confirm NTEP certification if weight will determine price. Ordering, warranty registration, and certified calibration for the Doran Pc400 are all handled in the USA.

    Direct product link: https://mnmscales.com/product/doran-pc400-02lft-stainless-steel-scale-2lbx0-002-lb-ntep/

    Technical questions about the Doran Pc400? Call 832-290-3120 or message a scale specialist, Monday – Friday, 10 AM – 4 PM CT.

    Explore related categories

    Keep researching with the category, manufacturer and accessory hubs this model belongs to: