Crane Scales
A crane scale is a digital weighing instrument that hangs between a lifting hook and the load and measures weight in tension through an internal load cell, typically from 500 lb to 20,000 lb capacity with 0.1% resolution. It is used wherever a load is lifted rather than set down — scrap and steel yards, fabrication shops, rigging crews and marine work.
Also called: hanging scale · digital crane scale · industrial hanging scale · load cell crane scale
Crane Scales in stock
Shipped from the United States with the manufacturer's warranty. Prices shown are current US pricing; call 832-290-3120 for volume quotes or application help.
How crane scales work and how to specify them
Inside a crane scale, the shackle assembly transfers the full load through an S-beam or load-pin cell whose strain gauges deform in proportion to the force applied. Because the load hangs freely, the reading is unaffected by an out-of-level floor, but it is affected by swing: the display must be allowed to settle before the weight is recorded, which is why quality units include motion detection and a hold function.
Two ratings matter and they are not the same. Rated capacity is the maximum weight the scale will display accurately. Working load limit (WLL) is the mechanical limit of the shackle and hook hardware, and safety factor (usually 4:1 or 5:1 to ultimate strength) governs what the assembly may legally lift. Never size a crane scale to your exact heaviest lift — allow headroom for dynamic shock loading when a load is snatched off the ground.
For legal-for-trade weighing — buying or selling scrap, produce or freight by weight — the crane scale must hold an NTEP Certificate of Conformance and be sealed by your state weights-and-measures authority. Every instrument can ship with a NIST-traceable calibration certificate performed in our Cypress, Texas service lab, and we handle on-site calibration and repair across the Houston metro.
Crane scale capacity selection
| Application | Typical capacity | Typical readability | Notes |
|---|---|---|---|
| Workshop, engine hoists, small assemblies | 1,000 lb | 0.5 lb | Battery powered, hook-mount |
| Fabrication, pipe and plate handling | 2,000–5,000 lb | 1–2 lb | Wireless remote recommended |
| Scrap, recycling, steel service centers | 10,000 lb | 5 lb | NTEP models available |
| Heavy industrial and marine lifting | 20,000 lb+ | 10 lb | Load-pin or dynamometer style |
What to check before you buy
- Capacity with headroom. Size at least 25% above your heaviest routine lift so shock loading never drives the cell past its rating.
- Shackle and hook grade. Confirm the supplied hardware's working load limit matches the scale's capacity — the weakest link governs the lift.
- Remote display. A wireless remote lets the operator read the weight from a safe standoff distance instead of under a suspended load.
- Resolution. Most crane scales resolve to 1/2,000 to 1/5,000 of capacity. If you need finer than that, the load belongs on a floor scale.
- NTEP. Required whenever the weight sets a price. Sealing is done by your state after installation.
Crane Scales buyer's guide: how to choose the right model
Work through these criteria in order. Each one narrows the shortlist, and getting them in this sequence is what prevents an expensive mismatch between the instrument and the job.
1. Confirm crane scales are the right class
The load is lifted and never set down on a platform. Hangs in tension between hook and load. If that does not describe your job, the wrong class will cost you twice — anything needing fine resolution or legal retail weighing at the counter.
Key criterion 1
Size capacity above your heaviest lift, then allow headroom for shock loading when a load is snatched off the ground.
Key criterion 2
Check working load limit and safety factor of the shackle and hook separately from the displayed capacity.
Key criterion 3
Specify a wireless remote if the operator cannot stand safely within reading distance of the display.
Key criterion 4
Confirm motion detection and a hold function so a swinging load can still be recorded.
2. Size the capacity with headroom
This class runs 500 lb – 20,000 lb+. Work from your heaviest realistic load including packaging, pallet or container, then step up to the next capacity rather than running an instrument at its ceiling every day.
3. Set readability from the smallest thing you measure
Typical readability here is 0.1% of capacity (0.5–10 lb). Choose resolution from the smallest increment you must resolve — not the largest weight — and remember that finer resolution means a slower, more environment-sensitive reading.
4. Match the instrument to the environment
Overhead cranes, hoists, rigging, yards, marine. Decide on washdown rating, mounting and display position before comparing prices; an under-specified enclosure is the most common reason a scale is replaced early.
5. Decide whether it must be legal for trade
NTEP models available at common capacities. If money changes hands on the basis of the weight, you need an approved model sealed by your state weights-and-measures authority; if it is an internal process check, you do not.
6. Plan data, service and calibration
Choose the data path you will actually use — printout, serial, USB or PLC — and budget annual calibration. We calibrate, certify and repair crane scales in our Cypress, Texas lab and on site across the Houston metro.
Crane Scales vs Floor Scales vs Industrial Scales vs NTEP Scales
These categories overlap in capacity but not in how the load is presented. Compare the rows below, then follow the link to the category that matches your application.
| Category | How it takes the load | Typical capacity | Typical readability | Use cases | Choose it when | Legal for trade |
|---|---|---|---|---|---|---|
| Crane Scales (this page) | Hangs in tension between hook and load | 500 lb – 20,000 lb+ | 0.1% of capacity (0.5–10 lb) | Overhead cranes, hoists, rigging, yards, marine | The load is lifted and never set down on a platform | NTEP models available at common capacities |
| Floor Scales | Low-profile platform on the floor, four load cells | 1,000 lb – 20,000 lb | 0.2 lb – 5 lb | Warehouses, docks, pallet and drum handling | Loads arrive on pallets, carts or drums and can be rolled or forked on | NTEP versions standard on most capacities |
| Industrial Scales | Any rugged production-floor weighing platform or system | 50 lb – 20,000 lb | 0.1 lb – 5 lb | Manufacturing, recycling, agriculture, logistics | The scale lives on a production floor and must survive it | NTEP available across most industrial classes |
| NTEP Scales | Any class of scale holding a Certificate of Conformance | Depends on class | Class II/III division limits apply | Anywhere goods change hands by weight | You buy, sell or bill by weight | This is the category — always verify the CoC number |
Certifications, datasheets and documentation
What we can certify for crane scales, and the documents you can download before you raise a purchase order.
Authorized A&D Weighing dealer
Sold as an authorized dealer since 1998, so every unit carries the full manufacturer warranty and factory firmware — not grey-market stock.
NIST-traceable calibration certificate
Any instrument can ship with a calibration certificate produced in our Cypress, Texas lab using mass standards traceable to NIST, with as-found and as-left values recorded.
NTEP legal-for-trade options
Models in this category are available with an NTEP Certificate of Conformance evaluated against NIST Handbook 44, ready for sealing by your state weights-and-measures authority.
ASTM E617 / OIML R111 test weights
Verification weights are supplied in ASTM Class 1–6 or OIML E2–M3 tolerances, sized so the standard's tolerance stays inside one third of the scale's smallest division.
In-house repair & on-site service
Factory-trained technicians repair, adjust and re-certify weighing equipment in our own Texas workshop and on-site across the Houston metro.
Crane Scales — specification datasheet (PDF)
Capacity and readability selection table, buying criteria, certification notes and the answers to the questions purchasing always asks — two pages, no email required.
Download datasheetInstruction manuals hosted here
Tell us the model and we will send the manufacturer's manual and declaration of conformity — call 832-290-3120.
All scale manuals and literatureCrane Scales glossary — the specification terms explained
Every term used in the tables above, defined the way NIST Handbook 44, ASTM E617 and OIML R76/R111 use it.
- Accuracy
- How close a displayed weight is to the sample's true mass. Accuracy is limited by readability, repeatability and linearity together, so a scale can never be more accurate than its specification sheet's worst of those three figures.
- Calibration
- Adjusting a scale's span so it reads a certified test weight correctly, documented with as-found and as-left values. Distinct from verification, which records a reading without changing anything.
- Capacity
- The maximum mass a scale is rated to weigh. Usable capacity is the rated capacity minus every container, fixture or platform that sits on the pan, because tare does not add capacity back.
- Crane scale
- A scale suspended from a hoist or crane hook that weighs a load in tension through a load cell or load pin. Rated in tons with a safety factor, and typically read at 1/2000 to 1/5000 of capacity.
- Division (d)
- The smallest increment the display can change by, also called readability or scale interval. A 1200 g x 0.01 g balance has a 0.01 g division and 120,000 divisions across its range.
- Drift
- A slow change in reading with no change in load, usually caused by temperature change, air movement, static, or a settling mechanical assembly rather than by an instrument fault.
- Legal for trade
- A device certified and sealed for use in commercial transactions where weight determines price. In the United States this requires an NTEP Certificate of Conformance and a seal from the state or local weights-and-measures authority.
- Linearity
- The maximum deviation from a straight line between zero and full capacity, expressed in divisions. A balance can be perfectly repeatable and still be non-linear, which is why calibration is checked at more than one point.
- Load cell
- The transducer that converts force into an electrical signal. Strain-gauge cells output a few millivolts per volt of excitation and are used from bench scales up to truck scales.
- NIST traceable
- A calibration performed with standards whose values link through an unbroken chain of comparisons, each with stated uncertainty, back to national standards held by NIST.
- NTEP
- The National Type Evaluation Program, run by NCWM, which tests weighing devices against NIST Handbook 44 and issues a Certificate of Conformance with an accuracy class. Required for legal-for-trade use.
- Readability
- The smallest increment a display can show. Readability is not accuracy: it sets the finest digit you can read, while accuracy also depends on repeatability and linearity.
Crane Scales — frequently asked questions
- How accurate is a digital crane scale?
- A typical industrial crane scale is accurate to ±0.1% of full capacity — about ±10 lb on a 10,000 lb unit. Accuracy depends on letting the load stop swinging before reading and on verifying the scale annually with certified test weights.
- What is the difference between a crane scale and a dynamometer?
- Both measure tension. A crane scale is optimized for weighing a suspended load and usually reads in lb/kg with a large display; a dynamometer is built for measuring line pull and rigging forces and typically has a higher safety factor and force units.
- Do crane scales need to be NTEP certified?
- Only if the weight determines money changing hands — buying scrap, selling steel by weight, or billing freight. For internal process control, a non-NTEP crane scale is perfectly legal.
- How often should a crane scale be calibrated?
- Verify with a known test weight monthly, and have a full NIST-traceable calibration performed annually or after any overload event or drop.