NTEP Legal for Trade Scales
An NTEP scale is a weighing device that holds a National Type Evaluation Program Certificate of Conformance, meaning its design was tested against NIST Handbook 44 and is approved for commercial use. Any scale whose reading determines the money a customer pays must be NTEP-certified and sealed by the state weights-and-measures authority.
Also called: legal for trade scale · class III scale · certified scale · commercial scale
NTEP Scales in stock
Shipped from the United States with the manufacturer's warranty. Prices shown are current US pricing; call 832-290-3120 for volume quotes or application help.
How ntep scales work and how to specify them
NTEP certification applies to a device design, not to an individual unit's accuracy. Certification means the model met Handbook 44 requirements for division size, repeatability, temperature stability, tamper resistance and indication. The individual installed unit must then be tested and sealed in place by a licensed service agency or state inspector before it can be used commercially.
Accuracy classes matter: Class III covers most commercial weighing (retail, shipping, freight, produce) at 1,200 to 10,000 divisions; Class II covers precious metals, gemstones and laboratory work at up to 100,000 divisions. Buying a Class III scale for jewelry sales, or vice versa, will fail inspection even though both are NTEP.
Where the base and indicator are separate components, the NTEP certificate applies to the combination — mixing an approved base with an unapproved indicator voids legal-for-trade status. Every instrument can ship with a NIST-traceable calibration certificate performed in our Cypress, Texas service lab, and we handle on-site calibration and repair across the Houston metro.
Where NTEP is required
| Application | Typical capacity | Typical readability | Notes |
|---|---|---|---|
| Deli, butcher, produce, farm stand | 30–60 lb | 0.01 lb | Class III price computing, sealed |
| Selling by weight — scrap, metals | 1,000–20,000 lb | 0.5–10 lb | Class III crane or floor scale |
| Freight billed by weight | 2,500–10,000 lb | 1–2 lb | Class III floor scale + approved indicator |
| Gold, jewelry, gemstones | 100–600 g | 0.001–0.01 g | Class II legal for trade |
What to check before you buy
- Class before capacity. Class III for commerce by weight; Class II for precious metals and lab-grade trade.
- Certificate of Conformance number. Ask for the CC number and confirm it covers the exact base + indicator pair.
- Sealing. Budget for state or licensed-agency inspection at installation; without the seal, the scale is not legal.
- Division count. More divisions is not always better — the certificate defines the maximum permitted for the class.
- Ongoing verification. Most jurisdictions require an annual inspection to keep the seal valid.
NTEP Scales buyer's guide: how to choose the right model
Work through these criteria in order. Each one narrows the shortlist, and getting them in this sequence is what prevents an expensive mismatch between the instrument and the job.
1. Confirm ntep scales are the right class
You buy, sell or bill by weight. Any class of scale holding a Certificate of Conformance. If that does not describe your job, the wrong class will cost you twice — internal process checks where no money changes hands.
Key criterion 1
Confirm the exact model and capacity appear on the Certificate of Conformance, not just the series.
Key criterion 2
The device must be sealed and placed into service under your state weights-and-measures rules.
Key criterion 3
Legal-for-trade limits displayed divisions, so a legal scale often reads coarser than its non-legal twin.
Key criterion 4
Keep calibration records; inspectors ask for them.
2. Size the capacity with headroom
This class runs Depends on class. Work from your heaviest realistic load including packaging, pallet or container, then step up to the next capacity rather than running an instrument at its ceiling every day.
3. Set readability from the smallest thing you measure
Typical readability here is Class II/III division limits apply. Choose resolution from the smallest increment you must resolve — not the largest weight — and remember that finer resolution means a slower, more environment-sensitive reading.
4. Match the instrument to the environment
Anywhere goods change hands by weight. Decide on washdown rating, mounting and display position before comparing prices; an under-specified enclosure is the most common reason a scale is replaced early.
5. Decide whether it must be legal for trade
This is the category — always verify the CoC number. If money changes hands on the basis of the weight, you need an approved model sealed by your state weights-and-measures authority; if it is an internal process check, you do not.
6. Plan data, service and calibration
Choose the data path you will actually use — printout, serial, USB or PLC — and budget annual calibration. We calibrate, certify and repair ntep scales in our Cypress, Texas lab and on site across the Houston metro.
NTEP Scales vs Price Computing Scales vs Floor Scales vs Shipping Scales
These categories overlap in capacity but not in how the load is presented. Compare the rows below, then follow the link to the category that matches your application.
| Category | How it takes the load | Typical capacity | Typical readability | Use cases | Choose it when | Legal for trade |
|---|---|---|---|---|---|---|
| NTEP Scales (this page) | Any class of scale holding a Certificate of Conformance | Depends on class | Class II/III division limits apply | Anywhere goods change hands by weight | You buy, sell or bill by weight | This is the category — always verify the CoC number |
| Price Computing Scales | Counter scale with price-per-unit keypad and customer display | 30 lb – 60 lb | 0.005 lb – 0.02 lb | Delis, produce, butchers, farmers' markets, dispensaries | You sell by weight and need the price calculated at the counter | NTEP and a state seal are mandatory for retail sales |
| Floor Scales | Low-profile platform on the floor, four load cells | 1,000 lb – 20,000 lb | 0.2 lb – 5 lb | Warehouses, docks, pallet and drum handling | Loads arrive on pallets, carts or drums and can be rolled or forked on | NTEP versions standard on most capacities |
| Shipping Scales | Bench or floor platform with parcel-friendly readability | 70 lb – 400 lb | 0.02 lb – 0.2 lb | Fulfilment benches, mail rooms, e-commerce packing | You are rating parcels for carrier billing weight | NTEP only needed if you sell by weight, not for carrier rating |
Certifications, datasheets and documentation
What we can certify for ntep scales, and the documents you can download before you raise a purchase order.
Authorized A&D Weighing dealer
Sold as an authorized dealer since 1998, so every unit carries the full manufacturer warranty and factory firmware — not grey-market stock.
NIST-traceable calibration certificate
Any instrument can ship with a calibration certificate produced in our Cypress, Texas lab using mass standards traceable to NIST, with as-found and as-left values recorded.
NTEP legal-for-trade options
Models in this category are available with an NTEP Certificate of Conformance evaluated against NIST Handbook 44, ready for sealing by your state weights-and-measures authority.
ASTM E617 / OIML R111 test weights
Verification weights are supplied in ASTM Class 1–6 or OIML E2–M3 tolerances, sized so the standard's tolerance stays inside one third of the scale's smallest division.
In-house repair & on-site service
Factory-trained technicians repair, adjust and re-certify weighing equipment in our own Texas workshop and on-site across the Houston metro.
NTEP Scales — specification datasheet (PDF)
Capacity and readability selection table, buying criteria, certification notes and the answers to the questions purchasing always asks — two pages, no email required.
Download datasheetInstruction manuals hosted here
Tell us the model and we will send the manufacturer's manual and declaration of conformity — call 832-290-3120.
All scale manuals and literatureNTEP Scales glossary — the specification terms explained
Every term used in the tables above, defined the way NIST Handbook 44, ASTM E617 and OIML R76/R111 use it.
- Accuracy
- How close a displayed weight is to the sample's true mass. Accuracy is limited by readability, repeatability and linearity together, so a scale can never be more accurate than its specification sheet's worst of those three figures.
- ASTM E617
- The American standard that defines tolerance classes for mass standards. Class 1 weights are the tightest commonly used for laboratory balances, Class 2 for 0.01 g balances, and Classes 4 and 6 for industrial platform and crane scales.
- Calibration
- Adjusting a scale's span so it reads a certified test weight correctly, documented with as-found and as-left values. Distinct from verification, which records a reading without changing anything.
- Capacity
- The maximum mass a scale is rated to weigh. Usable capacity is the rated capacity minus every container, fixture or platform that sits on the pan, because tare does not add capacity back.
- Division (d)
- The smallest increment the display can change by, also called readability or scale interval. A 1200 g x 0.01 g balance has a 0.01 g division and 120,000 divisions across its range.
- Legal for trade
- A device certified and sealed for use in commercial transactions where weight determines price. In the United States this requires an NTEP Certificate of Conformance and a seal from the state or local weights-and-measures authority.
- Linearity
- The maximum deviation from a straight line between zero and full capacity, expressed in divisions. A balance can be perfectly repeatable and still be non-linear, which is why calibration is checked at more than one point.
- NIST Handbook 44
- The United States specification, tolerance and technical requirement document for commercial weighing and measuring devices. NTEP evaluates devices against it.
- NTEP
- The National Type Evaluation Program, run by NCWM, which tests weighing devices against NIST Handbook 44 and issues a Certificate of Conformance with an accuracy class. Required for legal-for-trade use.
- NTEP accuracy class
- The class assigned to a certified device: Class I and II for laboratory, analytical and jewelry work, Class III for retail and general commercial weighing, and Class IIII for coarse industrial use.
- OIML R76 / R111
- The international recommendations for non-automatic weighing instruments (R76) and for weights of classes E1 to M3 (R111). They are the international counterparts to NIST Handbook 44 and ASTM E617.
- Verification
- Applying a certified test weight and recording the reading without adjusting the instrument. This is the record an auditor asks for, and it is not the same as calibration.
NTEP Scales — frequently asked questions
- What does NTEP certified mean?
- It means the scale model passed National Type Evaluation Program testing against NIST Handbook 44 and holds a Certificate of Conformance permitting its use in commercial transactions.
- Do I need an NTEP scale?
- You need one whenever the weight determines a price paid or received — retail sales by weight, buying scrap, billing freight by weight. Internal process control, inventory and shipping-cost verification do not require it.
- What is the difference between Class II and Class III scales?
- Class III covers general commercial weighing at 1,200–10,000 divisions. Class II covers precious metals, gems and laboratory trade at up to 100,000 divisions and much finer readability.
- Does an NTEP scale need to be sealed?
- Yes. Certification approves the design; the installed unit still has to be tested and sealed by the state weights-and-measures office or a licensed service agency before commercial use.