Do I need an NTEP legal-for-trade scale?
Short answer
You need an NTEP legal-for-trade scale any time the weight of goods determines the price paid — whether you are selling to a customer or buying from a supplier. In the United States, commercial weighing devices must hold a Certificate of Conformance issued under the National Type Evaluation Program (NTEP) and must be placed in service and sealed by your state's weights-and-measures authority. Using a non-certified scale for a priced transaction is a violation in every state that has adopted NIST Handbook 44, regardless of how accurate that scale actually is.
Written for delis, butcher shops, produce markets, bakeries, farm stands, jewelers, gold and scrap buyers, cannabis retailers, recycling yards, freight and any business that prices by weight.
Does this apply to you?
- A customer's total is calculated from a weight reading — deli counters, candy by the pound, bulk foods, seafood.
- You buy material by weight: scrap metal, precious metals, recycled cardboard, agricultural produce.
- You charge freight or dimensional weight to a customer from your own scale reading.
- You dispense cannabis or any regulated product where the sale quantity is a weight.
- A state inspector could reasonably ask to see the seal and Certificate of Conformance for the device.
How to decide
1. Confirm the transaction is a commercial one
Internal weighing — process control, formulation, shipping checks that never reach an invoice, R&D — does not require NTEP. The moment the number becomes the basis of a price, it does.
2. Match the accuracy class
Most retail and industrial trade devices are NTEP Class III. Precious metals, gemstones and pharmacy prescription weighing generally require Class II. Class IIII covers vehicle and axle-load scales. The class governs the number of legal divisions (n) the device may use, so a Class III scale cannot simply be run at a finer increment to gain resolution.
3. Check the divisions, not just the capacity
A legal-for-trade device is certified at a specific capacity and division (e.g. 30 lb x 0.01 lb). Running the same hardware at a finer division voids the certification. Choose the smallest capacity that comfortably covers your heaviest sale so each division is as fine as the law allows.
4. Have it placed in service and sealed
In most states the scale must be installed, calibrated and sealed by a registered service agency, then registered with the state department of agriculture or weights and measures. Keep the Certificate of Conformance number and the calibration record on file.
5. Re-verify on a schedule
Annual verification is typical; high-throughput retail and any device that has been moved, dropped or repaired should be re-verified sooner. Daily checks with a certified test weight catch drift long before an inspector does.
NTEP accuracy classes at a glance
| Class | Typical use |
|---|---|
| Class I | Analytical and laboratory reference weighing; very high division counts. |
| Class II | Jewelry, precious metals, gemstones, pharmacy and prescription compounding. |
| Class III | Most commercial trade: deli, produce, retail, shipping, counting, bench and floor scales. |
| Class IIII | Vehicle scales, axle-load weighers and other coarse high-capacity devices. |
Frequently asked questions
What does NTEP certified mean?
NTEP certification means the device design has passed National Type Evaluation Program testing and holds a Certificate of Conformance (CC) number confirming it meets NIST Handbook 44 requirements for a stated accuracy class, capacity and division. The certification applies to the design, so the specific unit still has to be installed, calibrated and sealed locally.
Is NTEP the same as legal for trade?
Effectively yes in the United States. 'Legal for trade' is the regulatory status of a device used in commerce; NTEP certification plus state placement-in-service and sealing is how a device attains that status.
Can I use a non-NTEP scale in my shop?
Yes, for anything that does not price a transaction — portioning, inventory, receiving checks, production control and internal quality work. It simply cannot be the scale a customer's total is calculated from.
Does a jewelry store need an NTEP scale?
If you buy or sell by weight — gold buying, scrap, loose gemstones, sales priced per gram or pennyweight — yes, and it generally needs to be NTEP Class II. A bench balance used only to check stock weights internally does not.
How often does a legal-for-trade scale need calibration?
Most states inspect annually, and most service contracts follow the same cycle. Verify with a certified test weight far more often than that — daily for retail counters — because the seal only proves the device was correct on the day it was sealed.
Still not sure? Tell us the job.
Describe what you weigh, the heaviest load and the tolerance you need to hold, and we will specify the instrument — including whether it has to be legal for trade. Same-day answers from Cypress, Texas.





