Jewelry Scales and Carat Balances
A jewelry scale is a high-resolution balance reading in carats (1 ct = 0.2 g exactly), grams, pennyweight and troy ounces, typically 100–600 g capacity at 0.001–0.01 g readability. Buying or selling precious metals or gemstones by weight requires an NTEP Class II legal-for-trade instrument.
Also called: carat scale · gold scale · gem scale · pennyweight scale · diamond scale
Jewelry Scales in stock
Shipped from the United States with the manufacturer's warranty. Prices shown are current US pricing; call 832-290-3120 for volume quotes or application help.
How jewelry scales work and how to specify them
Class II is the accuracy class that applies to precious-metal and gemstone trade, and it permits far more divisions than the Class III scales used elsewhere in retail. A Class III deli scale cannot legally be used to buy gold, regardless of how finely it reads.
Unit support is a practical differentiator: carats for gems, pennyweight (dwt) for scrap gold in the US trade, troy ounces for bullion, and grams as the reference. A scale that converts internally removes a manual conversion step and the arithmetic errors that come with it.
Small, light samples are the most sensitive to airflow and static, so use a draft shield or breeze break, keep the balance away from HVAC vents, and verify with a certified test weight at the start of each buying session. Every instrument can ship with a NIST-traceable calibration certificate performed in our Cypress, Texas service lab, and we handle on-site calibration and repair across the Houston metro.
Jewelry and carat scale selection
| Application | Typical capacity | Typical readability | Notes |
|---|---|---|---|
| Gold buying, scrap, pawn | 100–600 g | 0.01 g / dwt | NTEP Class II required |
| Gemstone and diamond weighing | 100–200 ct | 0.001 ct | Carat mode, draft shield |
| Bench jeweler, casting | 200–600 g | 0.01 g | Grams and troy ounces |
| Bullion verification | 1–6 kg | 0.1 g | Troy ounce mode |
What to check before you buy
- Legal for trade Class II. Required for buying or selling by weight — Class III will fail inspection.
- Unit set. ct, g, dwt and ozt with internal conversion.
- Draft protection. Essential at 0.001 g; small samples move with any airflow.
- Calibration weight. Keep an ASTM Class 1 or 2 weight on hand and verify each session.
- Capacity headroom. Include trays, tongs and packaging in the load you plan for.
Jewelry Scales buyer's guide: how to choose the right model
Work through these criteria in order. Each one narrows the shortlist, and getting them in this sequence is what prevents an expensive mismatch between the instrument and the job.
1. Confirm jewelry scales are the right class
You weigh gems, gold or silver and need carat, gram and troy units. Compact or precision balance with carat units and draft shield. If that does not describe your job, the wrong class will cost you twice — buying scrap metal by weight without an ntep legal-for-trade device.
Key criterion 1
Confirm the unit set includes ct, dwt, ozt and grain, not just grams.
Key criterion 2
A draft shield is essential below 0.01 g readability — small gems move in air currents.
Key criterion 3
For gold buying, choose an NTEP model and get it sealed by your state.
Key criterion 4
Add a set of traceable calibration weights and check daily; customers watch you do it.
2. Size the capacity with headroom
This class runs 20 g – 600 g. Work from your heaviest realistic load including packaging, pallet or container, then step up to the next capacity rather than running an instrument at its ceiling every day.
3. Set readability from the smallest thing you measure
Typical readability here is 0.001 g / 0.005 ct. Choose resolution from the smallest increment you must resolve — not the largest weight — and remember that finer resolution means a slower, more environment-sensitive reading.
4. Match the instrument to the environment
Jewellery counters, gem labs, precious metal buying. Decide on washdown rating, mounting and display position before comparing prices; an under-specified enclosure is the most common reason a scale is replaced early.
5. Decide whether it must be legal for trade
NTEP required when buying or selling precious metal by weight. If money changes hands on the basis of the weight, you need an approved model sealed by your state weights-and-measures authority; if it is an internal process check, you do not.
6. Plan data, service and calibration
Choose the data path you will actually use — printout, serial, USB or PLC — and budget annual calibration. We calibrate, certify and repair jewelry scales in our Cypress, Texas lab and on site across the Houston metro.
Jewelry Scales vs NTEP Scales vs Lab Balances vs Calibration Weights
These categories overlap in capacity but not in how the load is presented. Compare the rows below, then follow the link to the category that matches your application.
| Category | How it takes the load | Typical capacity | Typical readability | Use cases | Choose it when | Legal for trade |
|---|---|---|---|---|---|---|
| Jewelry Scales (this page) | Compact or precision balance with carat units and draft shield | 20 g – 600 g | 0.001 g / 0.005 ct | Jewellery counters, gem labs, precious metal buying | You weigh gems, gold or silver and need carat, gram and troy units | NTEP required when buying or selling precious metal by weight |
| NTEP Scales | Any class of scale holding a Certificate of Conformance | Depends on class | Class II/III division limits apply | Anywhere goods change hands by weight | You buy, sell or bill by weight | This is the category — always verify the CoC number |
| Lab Balances | Bench balance with draft shield on finer models | 120 g – 8 kg | 0.001 g – 0.1 g | QC labs, pharmacies, universities, production labs | You need milligram or centigram resolution with GLP output | NTEP versions available where sales by weight occur |
| Calibration Weights | Individual masses or sets, OIML/ASTM classified | 1 mg – 25 kg per piece | Tolerance defined by class (E2, F1, M1 / ASTM 1–4) | Every site that owns a scale | You must calibrate or verify a balance or scale | Class selection follows the instrument's division count |
Certifications, datasheets and documentation
What we can certify for jewelry scales, and the documents you can download before you raise a purchase order.
Authorized A&D Weighing dealer
Sold as an authorized dealer since 1998, so every unit carries the full manufacturer warranty and factory firmware — not grey-market stock.
NIST-traceable calibration certificate
Any instrument can ship with a calibration certificate produced in our Cypress, Texas lab using mass standards traceable to NIST, with as-found and as-left values recorded.
Class I / II accuracy models
Analytical, precision and jewelry instruments here are built to NTEP Class I and Class II accuracy classes — the classes required when weight is read to 0.1 mg–0.01 g.
ASTM E617 / OIML R111 test weights
Verification weights are supplied in ASTM Class 1–6 or OIML E2–M3 tolerances, sized so the standard's tolerance stays inside one third of the scale's smallest division.
In-house repair & on-site service
Factory-trained technicians repair, adjust and re-certify weighing equipment in our own Texas workshop and on-site across the Houston metro.
Jewelry Scales — specification datasheet (PDF)
Capacity and readability selection table, buying criteria, certification notes and the answers to the questions purchasing always asks — two pages, no email required.
Download datasheetInstruction manuals hosted here
- A&D FX-i / FZ-i Series instruction manualCovers: FX-120i, FX-123, FX-200i, FX-300i, FX-500i, FX-1200i, FX-2000i, FX-3000i, FZ-120i–FZ-3000i
- A&D HR-AZ / HR-A analytical series instruction manualCovers: HR-100A, HR-150A, HR-250A, HR-251A, HR-100AZ, HR-150AZ, HR-250AZ, HR-251AZ
Jewelry Scales glossary — the specification terms explained
Every term used in the tables above, defined the way NIST Handbook 44, ASTM E617 and OIML R76/R111 use it.
- Accuracy
- How close a displayed weight is to the sample's true mass. Accuracy is limited by readability, repeatability and linearity together, so a scale can never be more accurate than its specification sheet's worst of those three figures.
- Calibration
- Adjusting a scale's span so it reads a certified test weight correctly, documented with as-found and as-left values. Distinct from verification, which records a reading without changing anything.
- Capacity
- The maximum mass a scale is rated to weigh. Usable capacity is the rated capacity minus every container, fixture or platform that sits on the pan, because tare does not add capacity back.
- Carat (ct)
- A unit of gemstone mass equal to exactly 0.2 grams. A balance reading 0.001 g therefore resolves 0.005 ct.
- Division (d)
- The smallest increment the display can change by, also called readability or scale interval. A 1200 g x 0.01 g balance has a 0.01 g division and 120,000 divisions across its range.
- Force restoration
- A weighing mechanism that balances the load with an electromagnetic coil and measures the current needed to do so. It gives faster settling, better linearity and lower drift than a strain gauge, and is what A&D's SHS sensor uses.
- Grain (gr)
- A mass unit equal to 0.06479891 grams, used almost exclusively for propellant and bullet weights. One 0.001 g division equals about 0.0154 grain.
- Linearity
- The maximum deviation from a straight line between zero and full capacity, expressed in divisions. A balance can be perfectly repeatable and still be non-linear, which is why calibration is checked at more than one point.
- NIST traceable
- A calibration performed with standards whose values link through an unbroken chain of comparisons, each with stated uncertainty, back to national standards held by NIST.
- Pennyweight (dwt)
- A precious-metal mass unit equal to 1.55517 grams, or one twentieth of a troy ounce.
- Precision balance
- A balance reading to between 0.1 g and 0.001 g, usually with an open pan. Coarser than an analytical balance and far finer than a bench or platform scale.
- Troy ounce (ozt)
- A precious-metal mass unit equal to 31.1035 grams, distinct from the avoirdupois ounce of 28.3495 grams.
Jewelry Scales — frequently asked questions
- What scale do I need to buy gold?
- An NTEP Class II legal-for-trade scale, sealed by your state, reading in grams and pennyweight. Class III scales are not permitted for precious-metal transactions.
- How much is a carat in grams?
- One metric carat is exactly 0.2 grams, so a 5 ct stone weighs 1.000 g. Carat (gem weight) is unrelated to karat (gold purity).
- How accurate does a jewelry scale need to be?
- 0.01 g is adequate for scrap gold by pennyweight; gemstone work generally needs 0.001 ct. Accuracy in use depends on draft protection and session-start verification with a certified weight.
- Do jewelry scales need calibration?
- Yes — verify at the start of each buying session with a certified ASTM Class 1 or 2 weight and have a NIST-traceable calibration performed annually.