Industrial Scales

    Industrial scales are heavy-duty weighing systems built for production, warehouse and plant environments — floor and pallet scales, crane scales, bench scales and counting scales — typically rated 30 lb to 20,000 lb with sealed load cells and indicators specified for dust, moisture and vibration.

    Also called: heavy duty scale · warehouse scale · commercial scale · industrial weighing equipment

    Industrial Scales in stock

    Shipped from the United States with the manufacturer's warranty. Prices shown are current US pricing; call 832-290-3120 for volume quotes or application help.

    Loading industrial scales…

    How industrial scales work and how to specify them

    The choice between instrument classes comes down to how the load arrives. Loads that are forked or rolled belong on a floor scale; loads that are lifted belong on a crane scale; loads that are carried by hand belong on a bench scale; and loads counted rather than weighed belong on a counting scale. Trying to serve two of these with one instrument is the most common and most expensive specification mistake.

    Industrial environments punish electronics. Specify IP66/IP67 sealed load cells and stainless enclosures wherever there is wash-down, chemical exposure or high-pressure cleaning, and use a junction box with surge protection where lightning or welding transients are a risk.

    Where weights leave the plant on an invoice, the entire base-plus-indicator combination must be NTEP-approved and sealed. Every instrument can ship with a NIST-traceable calibration certificate performed in our Cypress, Texas service lab, and we handle on-site calibration and repair across the Houston metro.

    Which industrial scale for which job

    Which industrial scale for which job
    ApplicationTypical capacityTypical readabilityNotes
    Pallets, drums, carts1,000–10,000 lb0.5–2 lbFloor / pallet scale
    Suspended and lifted loads1,000–20,000 lb0.5–10 lbCrane scale
    Cartons, portions, receiving30–500 lb0.01–0.1 lbBench scale
    Fasteners and inventory6–150 lb0.001–0.01 lbCounting scale

    What to check before you buy

    • Match the instrument to the material handling. Forked, lifted, carried or counted — each implies a different class.
    • Environmental rating. IP66/IP67 stainless for wash-down; alloy cells are adequate for dry warehouses only.
    • Data output. RS-232, Ethernet or wireless where weights must land in a WMS or ERP.
    • Serviceability. Load cells and junction boxes should be field-replaceable without returning the base.
    • Compliance. NTEP plus state sealing for any weight that appears on an invoice.

    Industrial Scales buyer's guide: how to choose the right model

    Work through these criteria in order. Each one narrows the shortlist, and getting them in this sequence is what prevents an expensive mismatch between the instrument and the job.

    1. 1. Confirm industrial scales are the right class

      The scale lives on a production floor and must survive it. Any rugged production-floor weighing platform or system. If that does not describe your job, the wrong class will cost you twice — laboratory or analytical measurement.

    2. Key criterion 1

      Start from duty cycle: continuous weighing needs heavier cells and overload stops than occasional checks.

    3. Key criterion 2

      Specify the environmental rating (IP65/IP67) for the actual washdown or dust exposure.

    4. Key criterion 3

      Decide the data path early — comparator relays, analog output, Ethernet or serial to a PLC.

    5. Key criterion 4

      Budget annual calibration; industrial cells drift with shock loading.

    6. 2. Size the capacity with headroom

      This class runs 50 lb – 20,000 lb. Work from your heaviest realistic load including packaging, pallet or container, then step up to the next capacity rather than running an instrument at its ceiling every day.

    7. 3. Set readability from the smallest thing you measure

      Typical readability here is 0.1 lb – 5 lb. Choose resolution from the smallest increment you must resolve — not the largest weight — and remember that finer resolution means a slower, more environment-sensitive reading.

    8. 4. Match the instrument to the environment

      Manufacturing, recycling, agriculture, logistics. Decide on washdown rating, mounting and display position before comparing prices; an under-specified enclosure is the most common reason a scale is replaced early.

    9. 5. Decide whether it must be legal for trade

      NTEP available across most industrial classes. If money changes hands on the basis of the weight, you need an approved model sealed by your state weights-and-measures authority; if it is an internal process check, you do not.

    10. 6. Plan data, service and calibration

      Choose the data path you will actually use — printout, serial, USB or PLC — and budget annual calibration. We calibrate, certify and repair industrial scales in our Cypress, Texas lab and on site across the Houston metro.

    Industrial Scales vs Floor Scales vs Crane Scales vs Bench Scales

    These categories overlap in capacity but not in how the load is presented. Compare the rows below, then follow the link to the category that matches your application.

    Industrial Scales vs Floor Scales vs Crane Scales vs Bench Scales — selection comparison
    CategoryHow it takes the loadTypical capacityTypical readabilityUse casesChoose it whenLegal for trade
    Industrial Scales (this page)Any rugged production-floor weighing platform or system50 lb – 20,000 lb0.1 lb – 5 lbManufacturing, recycling, agriculture, logisticsThe scale lives on a production floor and must survive itNTEP available across most industrial classes
    Floor ScalesLow-profile platform on the floor, four load cells1,000 lb – 20,000 lb0.2 lb – 5 lbWarehouses, docks, pallet and drum handlingLoads arrive on pallets, carts or drums and can be rolled or forked onNTEP versions standard on most capacities
    Crane ScalesHangs in tension between hook and load500 lb – 20,000 lb+0.1% of capacity (0.5–10 lb)Overhead cranes, hoists, rigging, yards, marineThe load is lifted and never set down on a platformNTEP models available at common capacities
    Bench ScalesBench-top platform with a separate or integral indicator10 lb – 500 lb0.001 lb – 0.1 lbPacking benches, production cells, receiving desksOne person can lift the item onto a waist-height platformNTEP versions widely available

    Certifications, datasheets and documentation

    What we can certify for industrial scales, and the documents you can download before you raise a purchase order.

    • Authorized A&D Weighing dealer

      Sold as an authorized dealer since 1998, so every unit carries the full manufacturer warranty and factory firmware — not grey-market stock.

    • NIST-traceable calibration certificate

      Any instrument can ship with a calibration certificate produced in our Cypress, Texas lab using mass standards traceable to NIST, with as-found and as-left values recorded.

    • NTEP legal-for-trade options

      Models in this category are available with an NTEP Certificate of Conformance evaluated against NIST Handbook 44, ready for sealing by your state weights-and-measures authority.

    • ASTM E617 / OIML R111 test weights

      Verification weights are supplied in ASTM Class 1–6 or OIML E2–M3 tolerances, sized so the standard's tolerance stays inside one third of the scale's smallest division.

    • In-house repair & on-site service

      Factory-trained technicians repair, adjust and re-certify weighing equipment in our own Texas workshop and on-site across the Houston metro.

    Industrial Scales — specification datasheet (PDF)

    Capacity and readability selection table, buying criteria, certification notes and the answers to the questions purchasing always asks — two pages, no email required.

    Download datasheet

    Instruction manuals hosted here

    Tell us the model and we will send the manufacturer's manual and declaration of conformity — call 832-290-3120.

    All scale manuals and literature

    Industrial Scales glossary — the specification terms explained

    Every term used in the tables above, defined the way NIST Handbook 44, ASTM E617 and OIML R76/R111 use it.

    Accuracy
    How close a displayed weight is to the sample's true mass. Accuracy is limited by readability, repeatability and linearity together, so a scale can never be more accurate than its specification sheet's worst of those three figures.
    Calibration
    Adjusting a scale's span so it reads a certified test weight correctly, documented with as-found and as-left values. Distinct from verification, which records a reading without changing anything.
    Capacity
    The maximum mass a scale is rated to weigh. Usable capacity is the rated capacity minus every container, fixture or platform that sits on the pan, because tare does not add capacity back.
    Crane scale
    A scale suspended from a hoist or crane hook that weighs a load in tension through a load cell or load pin. Rated in tons with a safety factor, and typically read at 1/2000 to 1/5000 of capacity.
    Division (d)
    The smallest increment the display can change by, also called readability or scale interval. A 1200 g x 0.01 g balance has a 0.01 g division and 120,000 divisions across its range.
    Drift
    A slow change in reading with no change in load, usually caused by temperature change, air movement, static, or a settling mechanical assembly rather than by an instrument fault.
    Legal for trade
    A device certified and sealed for use in commercial transactions where weight determines price. In the United States this requires an NTEP Certificate of Conformance and a seal from the state or local weights-and-measures authority.
    Linearity
    The maximum deviation from a straight line between zero and full capacity, expressed in divisions. A balance can be perfectly repeatable and still be non-linear, which is why calibration is checked at more than one point.
    Load cell
    The transducer that converts force into an electrical signal. Strain-gauge cells output a few millivolts per volt of excitation and are used from bench scales up to truck scales.
    NIST traceable
    A calibration performed with standards whose values link through an unbroken chain of comparisons, each with stated uncertainty, back to national standards held by NIST.
    NTEP
    The National Type Evaluation Program, run by NCWM, which tests weighing devices against NIST Handbook 44 and issues a Certificate of Conformance with an accuracy class. Required for legal-for-trade use.
    Readability
    The smallest increment a display can show. Readability is not accuracy: it sets the finest digit you can read, while accuracy also depends on repeatability and linearity.
    Full scale glossary — every weighing term defined

    Industrial Scales — frequently asked questions

    What is an industrial scale?
    An industrial scale is a weighing system designed for plant, warehouse and production duty — sealed load cells, rugged decks, and indicators built for continuous use — as opposed to laboratory or retail instruments.
    How long do industrial scales last?
    A properly installed floor or bench scale routinely runs 10–15 years. Load cells fail from overload, moisture ingress and electrical surge far more often than from wear.
    How often should industrial scales be calibrated?
    Verify with a check weight at least monthly and schedule a NIST-traceable calibration annually — quarterly in regulated or high-throughput operations.
    Can you service scales on site?
    Yes. We provide on-site calibration, verification and repair across the Houston metro, and NIST-traceable bench calibration for units shipped to our Cypress, Texas lab.