Bench Scales

    A bench scale is a countertop weighing platform, typically 30 lb to 500 lb capacity with a 12x12 in to 24x24 in stainless platter, used for receiving, portioning, packaging and production checks. It sits between a compact balance (grams) and a floor scale (pallets) in both capacity and footprint.

    Also called: digital bench scale · portion scale · receiving scale · table top scale

    Bench Scales in stock

    Shipped from the United States with the manufacturer's warranty. Prices shown are current US pricing; call 832-290-3120 for volume quotes or application help.

    Loading bench scales…

    How bench scales work and how to specify them

    Bench scales are chosen for throughput as much as accuracy. A single strain-gauge cell under a rigid platter gives 1/5,000 to 1/10,000 division resolution, which is more than enough for boxing, portioning and receiving. What actually slows a line down is settling time and platter size, so match the platter to your largest carton and look for a fast stabilizing indicator.

    In food environments, specify a stainless steel platter and a sealed IP-rated indicator; painted mild steel will corrode where produce, brine or cleaning chemicals are present. Where the reading is used to set a price — deli, butcher, farm stand — you need an NTEP-certified legal-for-trade model.

    Bench scales with RS-232, USB or Ethernet output can feed weights straight into a shipping station or ERP, which removes the transcription errors that make manifest weights disagree with carrier audits. Every instrument can ship with a NIST-traceable calibration certificate performed in our Cypress, Texas service lab, and we handle on-site calibration and repair across the Houston metro.

    Bench scale selection by duty

    Bench scale selection by duty
    ApplicationTypical capacityTypical readabilityNotes
    Portioning, food prep, small parcels30–60 lb0.01–0.02 lb12x12 in stainless platter
    Packaging and receiving100–150 lb0.05 lb15x15 in platter
    Heavy cartons and freight parcels300–500 lb0.1 lb20x20 in or larger
    Wash-down food processing60–150 lb0.02–0.05 lbIP67 stainless, sealed keypad

    What to check before you buy

    • Platter versus package. Anything overhanging the platter loads the cell off-axis and shifts the reading.
    • Resolution you can actually use. 1/5,000 division is standard; higher resolution rarely survives a busy production bench.
    • NTEP if it sets a price. Retail, deli and direct-sale weighing must be legal for trade.
    • Connectivity. RS-232/USB output eliminates manual weight entry into shipping software.
    • Environment. Stainless and sealed electronics wherever there is moisture, dust or cleaning chemicals.

    Bench Scales buyer's guide: how to choose the right model

    Work through these criteria in order. Each one narrows the shortlist, and getting them in this sequence is what prevents an expensive mismatch between the instrument and the job.

    1. 1. Confirm bench scales are the right class

      One person can lift the item onto a waist-height platform. Bench-top platform with a separate or integral indicator. If that does not describe your job, the wrong class will cost you twice — pallets and drums, or milligram laboratory work.

    2. Key criterion 1

      Pick the platform size for your largest carton, not your average one.

    3. Key criterion 2

      Decide between a stainless washdown platform and a painted one before comparing prices.

    4. Key criterion 3

      Check the indicator has the mode you need — counting, checkweighing, accumulation — as standard.

    5. Key criterion 4

      Look for a remote-mount indicator bracket if bench space is tight.

    6. 2. Size the capacity with headroom

      This class runs 10 lb – 500 lb. Work from your heaviest realistic load including packaging, pallet or container, then step up to the next capacity rather than running an instrument at its ceiling every day.

    7. 3. Set readability from the smallest thing you measure

      Typical readability here is 0.001 lb – 0.1 lb. Choose resolution from the smallest increment you must resolve — not the largest weight — and remember that finer resolution means a slower, more environment-sensitive reading.

    8. 4. Match the instrument to the environment

      Packing benches, production cells, receiving desks. Decide on washdown rating, mounting and display position before comparing prices; an under-specified enclosure is the most common reason a scale is replaced early.

    9. 5. Decide whether it must be legal for trade

      NTEP versions widely available. If money changes hands on the basis of the weight, you need an approved model sealed by your state weights-and-measures authority; if it is an internal process check, you do not.

    10. 6. Plan data, service and calibration

      Choose the data path you will actually use — printout, serial, USB or PLC — and budget annual calibration. We calibrate, certify and repair bench scales in our Cypress, Texas lab and on site across the Houston metro.

    Bench Scales vs Shipping Scales vs Counting Scales vs Floor Scales

    These categories overlap in capacity but not in how the load is presented. Compare the rows below, then follow the link to the category that matches your application.

    Bench Scales vs Shipping Scales vs Counting Scales vs Floor Scales — selection comparison
    CategoryHow it takes the loadTypical capacityTypical readabilityUse casesChoose it whenLegal for trade
    Bench Scales (this page)Bench-top platform with a separate or integral indicator10 lb – 500 lb0.001 lb – 0.1 lbPacking benches, production cells, receiving desksOne person can lift the item onto a waist-height platformNTEP versions widely available
    Shipping ScalesBench or floor platform with parcel-friendly readability70 lb – 400 lb0.02 lb – 0.2 lbFulfilment benches, mail rooms, e-commerce packingYou are rating parcels for carrier billing weightNTEP only needed if you sell by weight, not for carrier rating
    Counting ScalesBench platform with piece-weight counting firmware3 kg – 30 kg0.1 g – 1 gKitting, inventory, hardware and fastener handlingYou need piece counts, not just weightRarely required — counting is an internal calculation
    Floor ScalesLow-profile platform on the floor, four load cells1,000 lb – 20,000 lb0.2 lb – 5 lbWarehouses, docks, pallet and drum handlingLoads arrive on pallets, carts or drums and can be rolled or forked onNTEP versions standard on most capacities

    Certifications, datasheets and documentation

    What we can certify for bench scales, and the documents you can download before you raise a purchase order.

    • Authorized A&D Weighing dealer

      Sold as an authorized dealer since 1998, so every unit carries the full manufacturer warranty and factory firmware — not grey-market stock.

    • NIST-traceable calibration certificate

      Any instrument can ship with a calibration certificate produced in our Cypress, Texas lab using mass standards traceable to NIST, with as-found and as-left values recorded.

    • NTEP legal-for-trade options

      Models in this category are available with an NTEP Certificate of Conformance evaluated against NIST Handbook 44, ready for sealing by your state weights-and-measures authority.

    • ASTM E617 / OIML R111 test weights

      Verification weights are supplied in ASTM Class 1–6 or OIML E2–M3 tolerances, sized so the standard's tolerance stays inside one third of the scale's smallest division.

    • In-house repair & on-site service

      Factory-trained technicians repair, adjust and re-certify weighing equipment in our own Texas workshop and on-site across the Houston metro.

    Bench Scales — specification datasheet (PDF)

    Capacity and readability selection table, buying criteria, certification notes and the answers to the questions purchasing always asks — two pages, no email required.

    Download datasheet

    Instruction manuals hosted here

    Tell us the model and we will send the manufacturer's manual and declaration of conformity — call 832-290-3120.

    All scale manuals and literature

    Bench Scales glossary — the specification terms explained

    Every term used in the tables above, defined the way NIST Handbook 44, ASTM E617 and OIML R76/R111 use it.

    Accuracy
    How close a displayed weight is to the sample's true mass. Accuracy is limited by readability, repeatability and linearity together, so a scale can never be more accurate than its specification sheet's worst of those three figures.
    Calibration
    Adjusting a scale's span so it reads a certified test weight correctly, documented with as-found and as-left values. Distinct from verification, which records a reading without changing anything.
    Capacity
    The maximum mass a scale is rated to weigh. Usable capacity is the rated capacity minus every container, fixture or platform that sits on the pan, because tare does not add capacity back.
    Crane scale
    A scale suspended from a hoist or crane hook that weighs a load in tension through a load cell or load pin. Rated in tons with a safety factor, and typically read at 1/2000 to 1/5000 of capacity.
    Division (d)
    The smallest increment the display can change by, also called readability or scale interval. A 1200 g x 0.01 g balance has a 0.01 g division and 120,000 divisions across its range.
    Drift
    A slow change in reading with no change in load, usually caused by temperature change, air movement, static, or a settling mechanical assembly rather than by an instrument fault.
    Legal for trade
    A device certified and sealed for use in commercial transactions where weight determines price. In the United States this requires an NTEP Certificate of Conformance and a seal from the state or local weights-and-measures authority.
    Linearity
    The maximum deviation from a straight line between zero and full capacity, expressed in divisions. A balance can be perfectly repeatable and still be non-linear, which is why calibration is checked at more than one point.
    Load cell
    The transducer that converts force into an electrical signal. Strain-gauge cells output a few millivolts per volt of excitation and are used from bench scales up to truck scales.
    NIST traceable
    A calibration performed with standards whose values link through an unbroken chain of comparisons, each with stated uncertainty, back to national standards held by NIST.
    NTEP
    The National Type Evaluation Program, run by NCWM, which tests weighing devices against NIST Handbook 44 and issues a Certificate of Conformance with an accuracy class. Required for legal-for-trade use.
    Readability
    The smallest increment a display can show. Readability is not accuracy: it sets the finest digit you can read, while accuracy also depends on repeatability and linearity.
    Full scale glossary — every weighing term defined

    Bench Scales — frequently asked questions

    What is a bench scale used for?
    Bench scales are used for receiving, portioning, packaging, parcel weighing, and production quality checks — any task too heavy for a compact balance and too small for a floor scale.
    What is the difference between a bench scale and a platform scale?
    The terms overlap. Bench scale usually means a countertop unit up to about 500 lb; platform scale usually implies a larger, floor-level deck for pallets and drums.
    How accurate is a digital bench scale?
    Most display 1/5,000 of capacity — a 150 lb x 0.05 lb scale, for example — and hold within one to two increments when level and calibrated against certified test weights.
    Can I use a bench scale for shipping?
    Yes. For carrier billing you want a scale that reads in the same increment the carrier bills in, and ideally one with a serial or USB output so weights transfer into your shipping software automatically.