Laboratory Balances
A laboratory balance is a high-resolution weighing instrument reading from 0.1 g down to 0.01 mg, used for sample preparation, formulation, density determination and quality control. Precision (top-loading) balances cover 0.001–0.1 g; analytical balances read 0.1 mg or finer and require a draft shield.
Also called: laboratory scale · precision balance · top loading balance · lab scale
Lab Balances in stock
Shipped from the United States with the manufacturer's warranty. Prices shown are current US pricing; call 832-290-3120 for volume quotes or application help.
How lab balances work and how to specify them
Choosing between precision and analytical comes down to the smallest quantity you must weigh accurately. USP <41> requires that the smallest net weight be at least 820 times the balance's repeatability standard deviation — in practice, if you weigh 20 mg samples you need an analytical balance, and if your smallest weight is a gram or more a precision balance is faster and far less sensitive to its environment.
Environment sets the real-world performance ceiling. Air currents, vibration, temperature gradients and static charge each shift readings by multiple divisions on a 0.1 mg balance. A dedicated stone or heavy bench away from doors and HVAC vents is worth more than upgrading the balance.
Internal (motorized) calibration keeps a balance in specification as temperature drifts and removes the need for handling external masses; external calibration is cheaper but requires ASTM E617 Class 1 or 2 weights and disciplined technique. Every instrument can ship with a NIST-traceable calibration certificate performed in our Cypress, Texas service lab, and we handle on-site calibration and repair across the Houston metro.
Laboratory balance selection
| Application | Typical capacity | Typical readability | Notes |
|---|---|---|---|
| Teaching, general lab, formulation | 600 g–6 kg | 0.01–0.1 g | Precision balance |
| Sample prep, QC checks | 120–3,000 g | 0.001 g | Precision, draft ring recommended |
| Assay, USP <41> compliance | 120–220 g | 0.1 mg | Analytical with draft shield |
| Micro-sample and reference work | 50–100 g | 0.01 mg | Semi-micro, controlled room |
What to check before you buy
- Smallest net weight, not capacity. Repeatability at your smallest sample determines whether the balance is fit for purpose.
- Internal calibration. Essential where room temperature swings or where audits require documented self-calibration.
- Draft protection. Mandatory at 0.1 mg; a draft ring is worthwhile at 1 mg.
- Data integrity. GLP/GMP printout, RS-232/USB output and audit-trail support for regulated labs.
- Weighing below the balance. A hook underneath enables density determination and magnetic sample work.
Lab Balances buyer's guide: how to choose the right model
Work through these criteria in order. Each one narrows the shortlist, and getting them in this sequence is what prevents an expensive mismatch between the instrument and the job.
1. Confirm lab balances are the right class
You need milligram or centigram resolution with GLP output. Bench balance with draft shield on finer models. If that does not describe your job, the wrong class will cost you twice — 0.1 mg analytical work, or anything above a few kilograms.
Key criterion 1
Work from the smallest quantity you must weigh, then apply a 1/10 readability rule.
Key criterion 2
Internal calibration saves the daily test-weight routine in regulated labs.
Key criterion 3
Confirm GLP/GMP-formatted printout if you must retain weighing records.
Key criterion 4
A stable bench away from HVAC vents matters more than the last digit of the spec sheet.
2. Size the capacity with headroom
This class runs 120 g – 8 kg. Work from your heaviest realistic load including packaging, pallet or container, then step up to the next capacity rather than running an instrument at its ceiling every day.
3. Set readability from the smallest thing you measure
Typical readability here is 0.001 g – 0.1 g. Choose resolution from the smallest increment you must resolve — not the largest weight — and remember that finer resolution means a slower, more environment-sensitive reading.
4. Match the instrument to the environment
QC labs, pharmacies, universities, production labs. Decide on washdown rating, mounting and display position before comparing prices; an under-specified enclosure is the most common reason a scale is replaced early.
5. Decide whether it must be legal for trade
NTEP versions available where sales by weight occur. If money changes hands on the basis of the weight, you need an approved model sealed by your state weights-and-measures authority; if it is an internal process check, you do not.
6. Plan data, service and calibration
Choose the data path you will actually use — printout, serial, USB or PLC — and budget annual calibration. We calibrate, certify and repair lab balances in our Cypress, Texas lab and on site across the Houston metro.
Lab Balances vs Analytical Balances vs Moisture Analyzers vs Counting Scales
These categories overlap in capacity but not in how the load is presented. Compare the rows below, then follow the link to the category that matches your application.
| Category | How it takes the load | Typical capacity | Typical readability | Use cases | Choose it when | Legal for trade |
|---|---|---|---|---|---|---|
| Lab Balances (this page) | Bench balance with draft shield on finer models | 120 g – 8 kg | 0.001 g – 0.1 g | QC labs, pharmacies, universities, production labs | You need milligram or centigram resolution with GLP output | NTEP versions available where sales by weight occur |
| Analytical Balances | Enclosed balance with glass draft chamber | 80 g – 320 g | 0.0001 g (0.1 mg) | Analytical and research labs, marble or granite benches | Method or pharmacopoeia requires 0.1 mg resolution | Not applicable — laboratory measurement, not trade |
| Moisture Analyzers | Balance with halogen or infrared heating chamber | 50 g – 200 g sample | 0.001 g / 0.01% moisture | Food, plastics, pharma and agricultural QC labs | You need loss-on-drying moisture content, not just weight | Not applicable |
| Counting Scales | Bench platform with piece-weight counting firmware | 3 kg – 30 kg | 0.1 g – 1 g | Kitting, inventory, hardware and fastener handling | You need piece counts, not just weight | Rarely required — counting is an internal calculation |
Certifications, datasheets and documentation
What we can certify for lab balances, and the documents you can download before you raise a purchase order.
Authorized A&D Weighing dealer
Sold as an authorized dealer since 1998, so every unit carries the full manufacturer warranty and factory firmware — not grey-market stock.
NIST-traceable calibration certificate
Any instrument can ship with a calibration certificate produced in our Cypress, Texas lab using mass standards traceable to NIST, with as-found and as-left values recorded.
Class I / II accuracy models
Analytical, precision and jewelry instruments here are built to NTEP Class I and Class II accuracy classes — the classes required when weight is read to 0.1 mg–0.01 g.
ASTM E617 / OIML R111 test weights
Verification weights are supplied in ASTM Class 1–6 or OIML E2–M3 tolerances, sized so the standard's tolerance stays inside one third of the scale's smallest division.
In-house repair & on-site service
Factory-trained technicians repair, adjust and re-certify weighing equipment in our own Texas workshop and on-site across the Houston metro.
Lab Balances — specification datasheet (PDF)
Capacity and readability selection table, buying criteria, certification notes and the answers to the questions purchasing always asks — two pages, no email required.
Download datasheetInstruction manuals hosted here
- A&D FX-i / FZ-i Series instruction manualCovers: FX-120i, FX-123, FX-200i, FX-300i, FX-500i, FX-1200i, FX-2000i, FX-3000i, FZ-120i–FZ-3000i
- A&D GX Series instruction manualCovers: GX-200, GX-400, GX-600, GX-800, GX-1000, GX-2000, GX-4000, GX-6100, GX-6000, GX-8000, GX-10K
- A&D GF Series instruction manualCovers: GF-200, GF-300, GF-400, GF-600, GF-1000, GF-2000, GF-3000, GF-4000, GF-6100, GF-8000, GF-10K
Lab Balances glossary — the specification terms explained
Every term used in the tables above, defined the way NIST Handbook 44, ASTM E617 and OIML R76/R111 use it.
- Accuracy
- How close a displayed weight is to the sample's true mass. Accuracy is limited by readability, repeatability and linearity together, so a scale can never be more accurate than its specification sheet's worst of those three figures.
- Analytical balance
- A balance reading to 0.0001 g (0.1 mg) or finer, enclosed in a draft chamber. Used for analytical chemistry, pharmaceutical assay and trace-level formulation.
- ASTM E617
- The American standard that defines tolerance classes for mass standards. Class 1 weights are the tightest commonly used for laboratory balances, Class 2 for 0.01 g balances, and Classes 4 and 6 for industrial platform and crane scales.
- Auto-zero tracking
- A function that continuously re-zeros small drifts near zero so the display stays at 0 when the pan is empty. It can mask a very slow addition of material, so it is disabled for some dispensing work.
- Calibration
- Adjusting a scale's span so it reads a certified test weight correctly, documented with as-found and as-left values. Distinct from verification, which records a reading without changing anything.
- Drift
- A slow change in reading with no change in load, usually caused by temperature change, air movement, static, or a settling mechanical assembly rather than by an instrument fault.
- Force restoration
- A weighing mechanism that balances the load with an electromagnetic coil and measures the current needed to do so. It gives faster settling, better linearity and lower drift than a strain gauge, and is what A&D's SHS sensor uses.
- GLP output
- A printout or data record that includes date, time, instrument identification and calibration status, as required by Good Laboratory Practice and comparable quality systems for audit trails.
- Moisture analyzer
- A balance combined with a controlled heater that weighs a sample, dries it, and reports moisture content as a percentage of the mass lost. Also called a loss-on-drying balance.
- Precision balance
- A balance reading to between 0.1 g and 0.001 g, usually with an open pan. Coarser than an analytical balance and far finer than a bench or platform scale.
- Resolution, internal
- The number of counts the analog-to-digital converter actually resolves internally, typically ten to a hundred times finer than the displayed readability. High internal resolution is what makes stable, fast display averaging possible.
- Stabilisation time
- How long after a load is applied before the reading is stable enough to record. It determines real throughput far more than capacity does in high-volume weighing.
Lab Balances — frequently asked questions
- What is the difference between an analytical and a precision balance?
- An analytical balance reads to 0.1 mg or finer and is enclosed in a draft shield; a precision (top-loading) balance reads 0.001 g to 0.1 g with higher capacity and much lower environmental sensitivity.
- How often should a lab balance be calibrated?
- Perform a daily or per-use check with a certified test weight, and a full NIST-traceable calibration annually — or per your quality system, which for GMP labs is often semi-annual.
- What calibration weight class do I need?
- As a rule the test weight's tolerance should be no more than one third of the balance's permitted error at that load: ASTM Class 1 for analytical balances, Class 2 for most precision balances.
- Why does my balance reading drift?
- Most drift is environmental — air movement, temperature change, static, or an unstable bench. Allow warm-up time, level the balance, keep it out of airflow, and ground or ionize static-prone samples.