Floor Scales and Pallet Scales

    A floor scale is a low-profile weighing platform — usually 3x3 ft to 5x5 ft and rated 1,000 lb to 10,000 lb — that sits on the floor so pallets, drums and carts can be rolled or forked directly onto it. Four load cells under the deck are summed in a junction box so the reading is the same wherever the load sits.

    Also called: pallet scale · platform scale · warehouse scale · drum scale · heavy duty floor scale

    Floor Scales in stock

    Shipped from the United States with the manufacturer's warranty. Prices shown are current US pricing; call 832-290-3120 for volume quotes or application help.

    Loading floor scales…

    How floor scales work and how to specify them

    The specification that separates a good floor scale from a cheap one is not capacity, it is corner (shift) error: how much the reading changes when the same weight is placed over one corner instead of the center. Real pallets are never centered, so a scale with poor corner correction will disagree with your shipper's scale. Look for a rigid deck, a properly potted summing box and factory corner trimming.

    Capacity should be sized for the gross load — product plus pallet plus any fork truck contact — with 20–25% headroom. Deck size should exceed the pallet footprint so nothing overhangs; a 48x48 in deck is the standard for GMA pallets, 5x5 ft for oversize. Add access ramps if you are loading with a pallet jack rather than a forklift.

    For shipping departments that bill by weight, or for anyone selling material by weight, the floor scale plus indicator must be an NTEP-approved combination. Every instrument can ship with a NIST-traceable calibration certificate performed in our Cypress, Texas service lab, and we handle on-site calibration and repair across the Houston metro.

    Floor and pallet scale selection

    Floor and pallet scale selection
    ApplicationTypical capacityTypical readabilityNotes
    Drums, carts, light pallets1,000–2,500 lb0.5 lb3x3 ft deck
    Standard GMA pallets, shipping5,000 lb1 lb4x4 ft deck, most common
    Oversize freight, machinery10,000 lb2 lb5x5 ft deck, ramps optional
    Wash-down / food processing2,500–5,000 lb1 lbStainless, IP67 cells

    What to check before you buy

    • Deck size before capacity. The load must sit fully inside the deck; overhang concentrates force on two cells and destroys accuracy.
    • Corner error spec. Ask for the published shift-test figure — this is what determines agreement with a carrier's scale.
    • Load cell environment rating. IP67/IP68 stainless cells for wash-down, alloy for dry warehouse duty.
    • Indicator features. Accumulation, tare memory, RS-232 or Ethernet output if weights feed a WMS or shipping system.
    • Installation. A pit-mount frame gives flush loading; a surface mount needs ramps for pallet jacks.

    Floor Scales buyer's guide: how to choose the right model

    Work through these criteria in order. Each one narrows the shortlist, and getting them in this sequence is what prevents an expensive mismatch between the instrument and the job.

    1. 1. Confirm floor scales are the right class

      Loads arrive on pallets, carts or drums and can be rolled or forked on. Low-profile platform on the floor, four load cells. If that does not describe your job, the wrong class will cost you twice — hand-portable parcels — a bench scale is faster and cheaper.

    2. Key criterion 1

      Match the deck size to the pallet or container footprint; overhanging loads distort corner readings.

    3. Key criterion 2

      Choose a ramp or pit-mount if pallet jacks must roll on rather than be forked on.

    4. Key criterion 3

      Painted mild steel is fine for dry warehouses; specify stainless and IP-rated cells for washdown areas.

    5. Key criterion 4

      Confirm the indicator can be mounted at eye level on a column or wall away from traffic.

    6. 2. Size the capacity with headroom

      This class runs 1,000 lb – 20,000 lb. Work from your heaviest realistic load including packaging, pallet or container, then step up to the next capacity rather than running an instrument at its ceiling every day.

    7. 3. Set readability from the smallest thing you measure

      Typical readability here is 0.2 lb – 5 lb. Choose resolution from the smallest increment you must resolve — not the largest weight — and remember that finer resolution means a slower, more environment-sensitive reading.

    8. 4. Match the instrument to the environment

      Warehouses, docks, pallet and drum handling. Decide on washdown rating, mounting and display position before comparing prices; an under-specified enclosure is the most common reason a scale is replaced early.

    9. 5. Decide whether it must be legal for trade

      NTEP versions standard on most capacities. If money changes hands on the basis of the weight, you need an approved model sealed by your state weights-and-measures authority; if it is an internal process check, you do not.

    10. 6. Plan data, service and calibration

      Choose the data path you will actually use — printout, serial, USB or PLC — and budget annual calibration. We calibrate, certify and repair floor scales in our Cypress, Texas lab and on site across the Houston metro.

    Floor Scales vs Crane Scales vs Industrial Scales vs Bench Scales

    These categories overlap in capacity but not in how the load is presented. Compare the rows below, then follow the link to the category that matches your application.

    Floor Scales vs Crane Scales vs Industrial Scales vs Bench Scales — selection comparison
    CategoryHow it takes the loadTypical capacityTypical readabilityUse casesChoose it whenLegal for trade
    Floor Scales (this page)Low-profile platform on the floor, four load cells1,000 lb – 20,000 lb0.2 lb – 5 lbWarehouses, docks, pallet and drum handlingLoads arrive on pallets, carts or drums and can be rolled or forked onNTEP versions standard on most capacities
    Crane ScalesHangs in tension between hook and load500 lb – 20,000 lb+0.1% of capacity (0.5–10 lb)Overhead cranes, hoists, rigging, yards, marineThe load is lifted and never set down on a platformNTEP models available at common capacities
    Industrial ScalesAny rugged production-floor weighing platform or system50 lb – 20,000 lb0.1 lb – 5 lbManufacturing, recycling, agriculture, logisticsThe scale lives on a production floor and must survive itNTEP available across most industrial classes
    Bench ScalesBench-top platform with a separate or integral indicator10 lb – 500 lb0.001 lb – 0.1 lbPacking benches, production cells, receiving desksOne person can lift the item onto a waist-height platformNTEP versions widely available

    Certifications, datasheets and documentation

    What we can certify for floor scales, and the documents you can download before you raise a purchase order.

    • Authorized A&D Weighing dealer

      Sold as an authorized dealer since 1998, so every unit carries the full manufacturer warranty and factory firmware — not grey-market stock.

    • NIST-traceable calibration certificate

      Any instrument can ship with a calibration certificate produced in our Cypress, Texas lab using mass standards traceable to NIST, with as-found and as-left values recorded.

    • NTEP legal-for-trade options

      Models in this category are available with an NTEP Certificate of Conformance evaluated against NIST Handbook 44, ready for sealing by your state weights-and-measures authority.

    • ASTM E617 / OIML R111 test weights

      Verification weights are supplied in ASTM Class 1–6 or OIML E2–M3 tolerances, sized so the standard's tolerance stays inside one third of the scale's smallest division.

    • In-house repair & on-site service

      Factory-trained technicians repair, adjust and re-certify weighing equipment in our own Texas workshop and on-site across the Houston metro.

    Floor Scales — specification datasheet (PDF)

    Capacity and readability selection table, buying criteria, certification notes and the answers to the questions purchasing always asks — two pages, no email required.

    Download datasheet

    Instruction manuals hosted here

    Tell us the model and we will send the manufacturer's manual and declaration of conformity — call 832-290-3120.

    All scale manuals and literature

    Floor Scales glossary — the specification terms explained

    Every term used in the tables above, defined the way NIST Handbook 44, ASTM E617 and OIML R76/R111 use it.

    Accuracy
    How close a displayed weight is to the sample's true mass. Accuracy is limited by readability, repeatability and linearity together, so a scale can never be more accurate than its specification sheet's worst of those three figures.
    Calibration
    Adjusting a scale's span so it reads a certified test weight correctly, documented with as-found and as-left values. Distinct from verification, which records a reading without changing anything.
    Capacity
    The maximum mass a scale is rated to weigh. Usable capacity is the rated capacity minus every container, fixture or platform that sits on the pan, because tare does not add capacity back.
    Crane scale
    A scale suspended from a hoist or crane hook that weighs a load in tension through a load cell or load pin. Rated in tons with a safety factor, and typically read at 1/2000 to 1/5000 of capacity.
    Division (d)
    The smallest increment the display can change by, also called readability or scale interval. A 1200 g x 0.01 g balance has a 0.01 g division and 120,000 divisions across its range.
    Drift
    A slow change in reading with no change in load, usually caused by temperature change, air movement, static, or a settling mechanical assembly rather than by an instrument fault.
    Legal for trade
    A device certified and sealed for use in commercial transactions where weight determines price. In the United States this requires an NTEP Certificate of Conformance and a seal from the state or local weights-and-measures authority.
    Linearity
    The maximum deviation from a straight line between zero and full capacity, expressed in divisions. A balance can be perfectly repeatable and still be non-linear, which is why calibration is checked at more than one point.
    Load cell
    The transducer that converts force into an electrical signal. Strain-gauge cells output a few millivolts per volt of excitation and are used from bench scales up to truck scales.
    NIST traceable
    A calibration performed with standards whose values link through an unbroken chain of comparisons, each with stated uncertainty, back to national standards held by NIST.
    NTEP
    The National Type Evaluation Program, run by NCWM, which tests weighing devices against NIST Handbook 44 and issues a Certificate of Conformance with an accuracy class. Required for legal-for-trade use.
    Readability
    The smallest increment a display can show. Readability is not accuracy: it sets the finest digit you can read, while accuracy also depends on repeatability and linearity.
    Full scale glossary — every weighing term defined

    Floor Scales — frequently asked questions

    What size floor scale do I need for a pallet?
    A 4 ft x 4 ft deck rated 5,000 lb handles standard 48x40 in GMA pallets and covers the majority of warehouse work. Move to 5 ft x 5 ft only if your loads overhang the pallet.
    How accurate are floor scales?
    A quality 5,000 lb floor scale displays in 1 lb increments and holds within ±1–2 increments across the deck once corner-trimmed. Accuracy in service depends on a level, solid foundation — flexing floors are the most common cause of drift.
    Can a floor scale be used for legal-for-trade shipping?
    Yes, if the scale base and indicator together carry an NTEP Certificate of Conformance and the installed system is sealed by your state weights-and-measures office.
    Do floor scales need ramps?
    Only if you load with a pallet jack. Forklifts can place loads directly on a surface-mounted deck; pallet jacks need either ramps or a pit installation.