Buying guides

    Not sure which scale you need? Start here.

    Most buyers know their problem — a customer's total is priced by weight, a fill tolerance keeps drifting, a count never matches the cycle count — but not which instrument solves it. These guides answer the question directly, explain the rule behind the answer, and point to the models that fit. If you would rather just ask, call 832-290-3120.

    Do I need an NTEP legal-for-trade scale?

    You need an NTEP legal-for-trade scale whenever weight determines price. Who it applies to, what NTEP Class III means, and how to stay compliant.

    Read the guide

    What capacity and readability do I actually need?

    Pick capacity from your heaviest load plus container, and readability from your tightest tolerance divided by ten. Worked examples and a selection table.

    Read the guide

    Analytical balance or precision balance — which do I need?

    An analytical balance reads to 0.1 mg behind a draft shield; a precision balance reads 0.001-0.1 g with more capacity. How to choose between them.

    Read the guide

    Why is my counting scale wrong — and how do I fix it?

    Counting scales miscount because of small sample sizes, piece-weight variation and insufficient internal resolution. Diagnose and fix each cause.

    Read the guide

    Which calibration weight class do I need?

    Pick a test weight whose tolerance is at most one third of your balance's permitted error at that load. ASTM and OIML classes explained.

    Read the guide

    How to choose a floor or pallet scale

    Deck size, corner error, capacity headroom, ramp access and pit vs surface mount — the five decisions that determine whether a floor scale works.

    Read the guide

    Crane scale capacity and safety — what to check before you lift

    Rated capacity, working load limit, shackle grade, safety factor and settling time. How to size a crane scale for a lift and use it safely.

    Read the guide

    What scale does a pharmacy need for USP <41> compliance?

    USP <41> sets a minimum weight from measured repeatability, and <1251> covers good weighing practice. What a compounding pharmacy actually needs.

    Read the guide

    Looking for your industry rather than a decision? See weighing by application, browse the full catalog, or check a term in the scale glossary.