Ids 811 Portable Counting Scale 66 Lbx 0 002 Lbcheckweigher With Multiple Review & Buying Guide
The Ids 811 Portable Counting Scale 66 Lbx 0 002 Lbcheckweigher With Multiple is a Precision parts counting scale. This guide covers its specifications, how this class of instrument works, how to choose capacity and resolution, calibration practice, and where to buy it in the USA.
🇺🇸 BUY FROM THE USA
The Ids 811 Portable Counting Scale 66 Lbx 0 002 Lbcheckweigher With Multiple is a Precision parts counting scale. This guide explains what the Ids 811 measures, how this class of instrument works, how to match capacity and resolution to your application, what calibration it needs, and where to buy it in the United States.
Ids 811 specifications
| Manufacturer | Precision |
|---|---|
| Model | Ids 811 |
| Instrument class | Parts counting scale |
| Availability | In stock — ships from the USA |
| Warranty | Full Precision manufacturer warranty |
| Calibration service | NIST-traceable, Cypress TX facility |
What is a parts counting scale?
A parts counting scale converts weight into piece count by dividing total load by an average piece weight (APW) learned from a sample. Counting accuracy depends far more on the consistency of the parts and the size of the sample than on the scale's weighing resolution.
How a parts counting scale works
You place a known quantity — typically 10, 25, 50, or 100 pieces — on the pan and enter that number. The scale computes APW = sample weight ÷ sample count, then reports count = total weight ÷ APW. Better counting scales add automatic APW re-optimisation: as you add more parts, the scale recalculates APW from the larger sample, progressively reducing the error inherited from the initial sample.
How to choose: what actually matters on a parts counting scale
These are the specifications that change the outcome of a purchase, in the order they should be evaluated.
- Internal counting resolution. The number that matters is the internal resolution (often 1/500,000 or 1/1,000,000 of capacity), not the displayed weight readability. A scale that displays to 1 g can still count parts weighing 0.05 g if its internal resolution is high enough.
- Minimum piece weight. Manufacturers publish this figure. As a working rule, one piece should weigh at least the internal resolution; counting parts lighter than that produces unreliable counts regardless of sample size.
- Sample size support. A 10-piece sample carries roughly three times the APW uncertainty of a 100-piece sample. Choose a scale that permits large samples and APW re-optimisation.
- Part-to-part variation. Injection-moulded plastic parts can vary 2–5% in mass; stamped metal parts under 1%. Counting error scales directly with this variation and cannot be engineered away.
- Remote platform support. A counting head with a separate high-capacity base lets you count small parts precisely while weighing a bulk container.
Getting accurate results from the Ids 811
Most complaints about scale accuracy are traceable to installation and procedure rather than to the instrument. The following practices apply directly to the Ids 811.
- Always sample from the same batch you are counting. Different production lots have different mean piece weights.
- Tare the empty bin before sampling so container weight never enters the APW calculation.
- For high-value inventory, verify a known count of 100 pieces before running a full cycle count.
- Re-establish APW whenever the part number, supplier, or lot changes — a stored APW is only valid for the lot it was learned from.
- Readability (also written as d, or the display division) is the smallest change in mass the display can show. It is not the same as accuracy: a balance reading to 0.01 g may still carry a linearity error of ±0.02 g. Accuracy is bounded by readability, repeatability (standard deviation of repeated loads), and linearity combined.
Where the Ids 811 is used
- Cycle counting and inventory reconciliation in warehousing
- Kitting and BOM verification on assembly lines
- Fastener, electronic component, and small-hardware distribution
- Pharmacy tablet and capsule counting
- Shipping verification: confirming carton piece counts before dispatch
Calibration and verification requirements
Every weighing instrument drifts. Span error grows with load, zero drifts with temperature, and mechanical wear changes both. Two separate activities keep a scale trustworthy:
- Verification — placing a certified test weight on the scale and recording the reading, without changing anything. This is a check, and it is the record an auditor wants to see.
- Calibration (adjustment) — correcting the instrument's span so it reads the certified value. This should be done by a qualified technician with traceable standards and documented afterwards.
Guidance in NIST Handbook 105-1 is that the test weight's tolerance should be no more than one third of the scale's smallest division; many quality systems tighten that to one tenth. In practice that means an ASTM Class 1 weight for balances reading to 0.001 g, Class 2 for 0.01 g, and Class 4 or 6 for industrial platform and crane scales. Typical intervals are annual for general industrial use, semi-annual or quarterly under ISO 9001 or GMP, and immediately after any move, overload, or suspected impact.
Certified calibration and repair for the Ids 811 is available through our calibration service and repair service, and locally in Texas through Houston scale services.
Is the Ids 811 legal for trade?
In the United States, a scale used to determine the price a customer pays must be certified under the National Type Evaluation Program (NTEP) and sealed by the state or local weights-and-measures authority. NTEP evaluates a device against NIST Handbook 44 and assigns an accuracy class — Class I and II for laboratory and jewelry work, Class III for retail and general commercial weighing, Class IIII for coarse industrial use. Laboratory accuracy on its own does not make an instrument legal for trade, and a certified instrument loses legal standing if the seal is broken or the device is moved without re-verification. If weight determines money changing hands in your operation, confirm the NTEP Certificate of Conformance number before you buy.
Where to buy the Ids 811 in the USA
The Ids 811 Portable Counting Scale 66 Lbx 0 002 Lbcheckweigher With Multiple is stocked in the United States by MNM Scales, a specialty weighing-systems dealer operating since 1998 out of Cypress, Texas. Buying from a scale specialist rather than a general marketplace matters for three concrete reasons on precision equipment:
- Calibration on arrival. A scale shipped without a pre-delivery check frequently needs adjustment out of the box, especially after air freight.
- Warranty registration. The manufacturer warranty is registered in the buyer's name, which matters if a load cell fails in year two.
- Service capability. Repair and recertification happen in-house rather than through a return-to-manufacturer cycle.
Our sister operations cover the same catalog: MNM Scales for the full multi-brand range and AllscalesUSA for nationwide sales and service. Both ship free to the mainland USA.
Frequently asked questions
What is the capacity and readability of the Ids 811?
Capacity and readability for the Ids 811 are listed on the Precision product page; this model is supplied in a single configuration. Remember to subtract the weight of any container from capacity when planning your usable range.
What is the difference between readability and accuracy on the Ids 811?
Readability is the smallest increment the display can show. Accuracy is how close the reading is to true mass, and it is limited by three things together: readability, repeatability (the standard deviation of repeated identical loads), and linearity (deviation from a straight line across the range). A scale can display one more digit than it can reliably guarantee, so the specification sheet's repeatability and linearity figures matter as much as the readability number.
What test weight should be used to calibrate the Ids 811?
Use a certified weight at or near full capacity, with a tolerance no greater than one third of the scale's smallest division. For laboratory resolutions that means ASTM E617 Class 1 or Class 2; for industrial platform and crane scales, Class 4 or Class 6 is standard. Verifying only at low load cannot detect span error, because span error is proportional to the load applied.
How often should the Ids 811 be calibrated?
Annually for general commercial and industrial use; semi-annually or quarterly where ISO 9001, GMP, HACCP, or a customer specification requires it; and immediately after any relocation, suspected overload, or impact. Legal-for-trade devices additionally follow the inspection cycle set by the local weights-and-measures jurisdiction, which is usually annual.
Does the Ids 811 come with a warranty, and is it in stock?
Yes. Units are supplied new with the full Precision manufacturer warranty registered in the buyer's name, and the Ids 811 is currently in stock for shipment within the mainland USA. Check current pricing and stock for the Ids 811.
Can the Ids 811 be repaired rather than replaced?
In most cases yes. The common failure points on this class of instrument are the load cell, the keypad membrane, the display ribbon, and the power supply — all replaceable. Repair is generally worthwhile when the instrument's replacement cost is high relative to the repair, and every repair should be followed by a full recalibration and a new certificate.
Summary
The Ids 811 Portable Counting Scale 66 Lbx 0 002 Lbcheckweigher With Multiple is a Precision parts counting scale. Match capacity to your heaviest load plus its container, choose readability at least ten times finer than the smallest difference you need to detect, verify with a certified weight on a documented interval, and confirm NTEP certification if weight will determine price. Ordering, warranty registration, and certified calibration for the Ids 811 are all handled in the USA.
Direct product link: https://mnmscales.com/product/ids-811-portable-counting-scale-66-lbx-0-002-lbcheckweigher-with-multiple/
Technical questions about the Ids 811? Call 832-290-3120 or message a scale specialist, Monday – Friday, 10 AM – 4 PM CT.
Explore related categories
Keep researching with the category, manufacturer and accessory hubs this model belongs to: