Washdown Stainless Steel Floor Scale 5000 LB NTEP Class Iii Top Lift Up For Easy Cleaning With Cardinal Detecto 190 Storm Indicator Review & Buying Guide
The Washdown Stainless Steel Floor Scale 5000 LB NTEP Class Iii Top Lift Up For Easy Cleaning With Cardinal Detecto 190 Storm Indicator is a Precision floor scale rated to 5,000 lb. This guide covers its specifications, how this class of instrument works, how to choose capacity and resolution, calibration practice, and where to buy it in the USA.
🇺🇸 BUY FROM THE USA
The Washdown Stainless Steel Floor Scale 5000 LB NTEP Class Iii Top Lift Up For Easy Cleaning With Cardinal Detecto 190 Storm Indicator is a Precision floor scale with a 5,000 lb capacity. This guide explains what the Washdown Stainless measures, how this class of instrument works, how to match capacity and resolution to your application, what calibration it needs, and where to buy it in the United States.
Washdown Stainless specifications
| Manufacturer | Precision |
|---|---|
| Model | Washdown Stainless |
| Instrument class | Floor scale |
| Capacity | 5,000 lb |
| Availability | In stock — ships from the USA |
| Warranty | Full Precision manufacturer warranty |
| Calibration service | NIST-traceable, Cypress TX facility |
What is a floor scale?
A floor scale is a low-profile, high-capacity platform installed at or near ground level for pallets, drums, and carts. The Washdown Stainless is rated to 5,000 lb. A typical unit uses four shear-beam load cells at the platform corners feeding a summing junction box and a separate indicator.
How a floor scale works
Each of the four shear-beam cells carries roughly one quarter of the load. Their millivolt outputs are combined in a junction box, where trim potentiometers or digital corner adjustment equalise the cells so the reading is the same wherever the load sits on the deck. Because total capacity is divided across four cells, a 5,000 lb floor scale is built from four 2,500 lb cells to allow for uneven and dynamic loading.
Washdown Stainless capacity in other units
Capacity is quoted as 5,000 lb. The same capacity expressed in the units buyers commonly work in:
| Grams (g) | 2,267,961.85 |
|---|---|
| Kilograms (kg) | 2,267.9619 |
| Pounds (lb) | 5,000 |
| Ounces (oz) | 80,000 |
| Troy ounces (ozt) | 72,916.667 |
| Carats (ct) | 11,339,809.3 |
How to choose: what actually matters on a floor scale
These are the specifications that change the outcome of a purchase, in the order they should be evaluated.
- Deck height and ramps. A pallet jack needs either a pit-mounted scale or ramps; low-profile decks under 3.5 in. often avoid ramps entirely with an electric jack.
- Capacity margin for dynamic loading. Driving a loaded pallet jack onto a deck applies impact well above static weight. A 30–50% margin over your heaviest static load is standard practice.
- Cell type and sealing. Hermetically sealed stainless cells (IP67/IP68) are worth the premium anywhere there is washdown, condensation, or outdoor exposure; potted cells fail on moisture ingress.
- NTEP and installation. Legal-for-trade use requires certified components and a sealed installation performed by a licensed service company.
- Overload stops. Built-in mechanical stops limit cell deflection and protect against dropped loads.
Getting accurate results from the Washdown Stainless
Most complaints about scale accuracy are traceable to installation and procedure rather than to the instrument. The following practices apply directly to the Washdown Stainless.
- Anchor or shim the scale so all four feet carry load; an unloaded corner destroys accuracy and overloads the other three cells.
- Perform a corner (section) test at commissioning and annually: a test load at each corner should agree within one division.
- Never weld on or near the platform without disconnecting the cells — welding current through a load cell destroys it.
- Keep the pit or under-deck area free of debris; anything touching the deck bypasses the cells.
Where the Washdown Stainless is used
- Pallet and freight weighing in warehousing and 3PL
- Drum and tote filling in chemical processing
- Scrap, recycling, and waste-stream measurement
- Manufacturing WIP and raw-material receiving
- Livestock and agricultural bulk handling
Calibration and verification requirements
Every weighing instrument drifts. Span error grows with load, zero drifts with temperature, and mechanical wear changes both. Two separate activities keep a scale trustworthy:
- Verification — placing a certified test weight on the scale and recording the reading, without changing anything. This is a check, and it is the record an auditor wants to see.
- Calibration (adjustment) — correcting the instrument's span so it reads the certified value. This should be done by a qualified technician with traceable standards and documented afterwards.
Guidance in NIST Handbook 105-1 is that the test weight's tolerance should be no more than one third of the scale's smallest division; many quality systems tighten that to one tenth. In practice that means an ASTM Class 1 weight for balances reading to 0.001 g, Class 2 for 0.01 g, and Class 4 or 6 for industrial platform and crane scales. Typical intervals are annual for general industrial use, semi-annual or quarterly under ISO 9001 or GMP, and immediately after any move, overload, or suspected impact.
Certified calibration and repair for the Washdown Stainless is available through our calibration service and repair service, and locally in Texas through Houston scale services.
Is the Washdown Stainless legal for trade?
In the United States, a scale used to determine the price a customer pays must be certified under the National Type Evaluation Program (NTEP) and sealed by the state or local weights-and-measures authority. NTEP evaluates a device against NIST Handbook 44 and assigns an accuracy class — Class I and II for laboratory and jewelry work, Class III for retail and general commercial weighing, Class IIII for coarse industrial use. Laboratory accuracy on its own does not make an instrument legal for trade, and a certified instrument loses legal standing if the seal is broken or the device is moved without re-verification. If weight determines money changing hands in your operation, confirm the NTEP Certificate of Conformance number before you buy.
Where to buy the Washdown Stainless in the USA
The Washdown Stainless Steel Floor Scale 5000 LB NTEP Class Iii Top Lift Up For Easy Cleaning With Cardinal Detecto 190 Storm Indicator is stocked in the United States by MNM Scales, a specialty weighing-systems dealer operating since 1998 out of Cypress, Texas. Buying from a scale specialist rather than a general marketplace matters for three concrete reasons on precision equipment:
- Calibration on arrival. A scale shipped without a pre-delivery check frequently needs adjustment out of the box, especially after air freight.
- Warranty registration. The manufacturer warranty is registered in the buyer's name, which matters if a load cell fails in year two.
- Service capability. Repair and recertification happen in-house rather than through a return-to-manufacturer cycle.
Our sister operations cover the same catalog: MNM Scales for the full multi-brand range and AllscalesUSA for nationwide sales and service. Both ship free to the mainland USA.
Frequently asked questions
What is the capacity and readability of the Washdown Stainless?
The Washdown Stainless is rated to 5,000 lb. Remember to subtract the weight of any container from capacity when planning your usable range.
What is the difference between readability and accuracy on the Washdown Stainless?
Readability is the smallest increment the display can show. Accuracy is how close the reading is to true mass, and it is limited by three things together: readability, repeatability (the standard deviation of repeated identical loads), and linearity (deviation from a straight line across the range). A scale can display one more digit than it can reliably guarantee, so the specification sheet's repeatability and linearity figures matter as much as the readability number.
What test weight should be used to calibrate the Washdown Stainless?
Use a certified weight at or near full capacity, with a tolerance no greater than one third of the scale's smallest division. For laboratory resolutions that means ASTM E617 Class 1 or Class 2; for industrial platform and crane scales, Class 4 or Class 6 is standard. Verifying only at low load cannot detect span error, because span error is proportional to the load applied.
How often should the Washdown Stainless be calibrated?
Annually for general commercial and industrial use; semi-annually or quarterly where ISO 9001, GMP, HACCP, or a customer specification requires it; and immediately after any relocation, suspected overload, or impact. Legal-for-trade devices additionally follow the inspection cycle set by the local weights-and-measures jurisdiction, which is usually annual.
Does the Washdown Stainless come with a warranty, and is it in stock?
Yes. Units are supplied new with the full Precision manufacturer warranty registered in the buyer's name, and the Washdown Stainless is currently in stock for shipment within the mainland USA. Check current pricing and stock for the Washdown Stainless.
Can the Washdown Stainless be repaired rather than replaced?
In most cases yes. The common failure points on this class of instrument are the load cell, the keypad membrane, the display ribbon, and the power supply — all replaceable. Repair is generally worthwhile when the instrument's replacement cost is high relative to the repair, and every repair should be followed by a full recalibration and a new certificate.
Summary
The Washdown Stainless Steel Floor Scale 5000 LB NTEP Class Iii Top Lift Up For Easy Cleaning With Cardinal Detecto 190 Storm Indicator is a Precision floor scale rated to 5,000 lb. Match capacity to your heaviest load plus its container, choose readability at least ten times finer than the smallest difference you need to detect, verify with a certified weight on a documented interval, and confirm NTEP certification if weight will determine price. Ordering, warranty registration, and certified calibration for the Washdown Stainless are all handled in the USA.
Direct product link: https://mnmscales.com/product/washdown-stainless-steel-floor-scale-5000-lb-ntep-class-iii-top-lift-up-for-easy-cleaning-with-cardinal-detecto-190-storm-indicator/
Technical questions about the Washdown Stainless? Call 832-290-3120 or message a scale specialist, Monday – Friday, 10 AM – 4 PM CT.
Explore related categories
Keep researching with the category, manufacturer and accessory hubs this model belongs to:
- Floor Scales — capacities, readability and selection guide
- Industrial Scales — capacities, readability and selection guide
- NTEP Scales — capacities, readability and selection guide
- Detecto scales — full range and series comparison
- Load Cells
- Weight Indicators
- Scale Accessories
- All scale and balance types
- Scale glossary — every spec term defined