ST 500S Type Laod Cell Alloy STEEL500 lb 2 EYE Bolts 20 Cableuse For Crane — Precision crane scale
    Precision

    ST 500S Type Laod Cell Alloy STEEL500 lb 2 EYE Bolts 20 Cableuse For Crane

    $99.00USD · free mainland US shipping

    The ST 500S Type Laod Cell Alloy STEEL500 lb 2 EYE Bolts 20 Cableuse For Crane is a Precision crane scale with a 500 lb capacity. It is used by steel yards, scrap and recycling, fabrication shops, marine and rigging crews, and is stocked and shipped from the United States.

    In stock, ships from the USA Free fast mainland US shipping Full manufacturer warranty Calibration & repair in Texas

    Orders are fulfilled by our US sales sites, mnmscales.com and allscalesusa.com. Quantity and government pricing available.

    ST-500S specifications

    ManufacturerPrecision
    ModelST-500S
    Instrument classCrane scale
    Capacity500 lb
    Part numberST-500S
    Price (USD)$99.00
    AvailabilityIn stock — ships from the USA
    WarrantyFull Precision manufacturer warranty
    CalibrationNIST-traceable certificate available
    SupportCypress, Texas service facility — 832-290-3120

    Capacity in other units

    Grams (g)226,796.185
    Kilograms (kg)226.7962
    Pounds (lb)500
    Ounces (oz)8,000
    Troy ounces (ozt)7,291.667
    Carats (ct)1,133,980.9

    What is a crane scale?

    A crane scale is a suspended weighing device fitted between a lifting hook and its load, using a shackle-and-hook assembly with an internal load cell in tension. The ST-500S is rated to 500 lb. Because it is part of the lifting path, a crane scale is a load-bearing rigging component and is governed by lifting-safety practice, not just weighing accuracy.

    Load is carried through a hardened steel body containing an S-type or tension load cell. Strain gauges bonded to the cell's flexure change resistance as the steel elongates under tension; a Wheatstone bridge converts this to a millivolt signal proportional to load, which the indicator scales to engineering units. Housings are typically cast or machined alloy rated to a working load limit with a design safety factor of 4:1 or 5:1 to ultimate strength.

    What the ST-500S is used for

    • •Steel service centres and metal recycling: coil, bundle, and bale weighing
    • •Ports, shipyards, and heavy fabrication
    • •Scrap and waste handling with grapple or magnet attachments
    • •Agricultural livestock and bulk-bag weighing
    • •Proof-load testing and rigging verification

    Setup, calibration and daily practice

    • •Never stand or work under a suspended load; read weight from a remote display or from the side.
    • •Let the load stop swinging before reading — dynamic loading can momentarily exceed static weight by a large margin during acceleration or shock.
    • •Zero the scale with the empty rigging (slings, spreader bar, chains) attached so the reading is net load.
    • •Inspect the hook throat opening, latch, and body for deformation before each shift. A hook whose throat has opened more than 15% must be removed from service.
    • •Re-verify calibration annually, or after any suspected overload or drop.

    How to specify this class of instrument

    • •<strong>Capacity vs. working load limit.</strong> Size the scale so the routine load sits between 30% and 80% of rated capacity. Running a crane scale near capacity every lift wears the cell and risks overload events.
    • •<strong>Resolution expectations.</strong> Crane scales typically resolve to 1/2,000 to 1/10,000 of capacity. A 2,000 lb crane scale reading in 1 lb steps is a good specification; expecting 0.1 lb from it is not realistic.
    • •<strong>Overload protection and safety factor.</strong> Look for a published mechanical overload rating (commonly 150% of capacity) and an ultimate breaking load of at least 400–500% of the working load limit.
    • •<strong>Hook and shackle certification.</strong> Hooks should be forged, latched, and traceable. Swivel hooks reduce twisting of the load and cable.
    • •<strong>Remote display and radio range.</strong> Wireless indicators let the operator read weight from a safe standoff distance, which is often the deciding practical feature.
    • •<strong>Environment rating.</strong> Outdoor and foundry use requires an IP-rated housing and a display readable in direct sunlight.

    ST-500S manual summary

    Unpacking and installation

    Inspect the hook, shackle and load pin for deformation or cracks before the first lift. Fit only shackles of the specified grade, charge the battery fully, and confirm the remote transmitter pairs with the display.

    Calibration and verification

    Calibrate in tension with a certified load or proving ring at a load near working capacity. Never exceed the rated working load limit; the safe working load of the weakest component in the rigging governs.

    Error codes and symptoms

    SymptomCause and remedy
    Reading will not stabiliseLoad is still swinging. Allow it to settle; do not read a moving load.
    Remote display drops outBattery low or out of line-of-sight range. Replace batteries and reduce obstruction.
    Zero shifts between liftsRigging left attached in the zero reading, or hook damage. Re-zero with rigging in place and inspect the hook.

    Care and re-verification

    Log every lift, inspect the load pin and hook regularly, and have the unit recertified annually.

    Documentation and literature

    Every unit ships with the Precision operation manual covering keypad functions, span calibration, unit switching and error codes. The commissioning and calibration steps above summarise that documentation so the instrument can be put into service immediately. Need a copy of the manual, a declaration of conformity, or a NIST-traceable calibration certificate for the ST-500S? Request it with your order or call 832-290-3120 and we will send it directly.

    See our manuals & literature library for setup, calibration and error-code guidance across every instrument class we carry.

    Read the full ST-500S buying guide

    An in-depth guide covering specification trade-offs, standards references and comparable models.

    ST-500S review & buying guide →

    Frequently asked questions

    What is the ST-500S used for?

    The ST 500S Type Laod Cell Alloy STEEL500 lb 2 EYE Bolts 20 Cableuse For Crane is a Precision crane scale with a 500 lb capacity. It is specified by steel yards, scrap and recycling, fabrication shops, marine and rigging crews.

    What is a crane scale?

    A crane scale is a suspended weighing device fitted between a lifting hook and its load, using a shackle-and-hook assembly with an internal load cell in tension. The ST-500S is rated to 500 lb. Because it is part of the lifting path, a crane scale is a load-bearing rigging component and is governed by lifting-safety practice, not just weighing accuracy.

    How do I calibrate the ST-500S?

    Let the instrument warm up on a level, vibration-free surface, run its span calibration routine with a certified test weight at or near full capacity, then verify with a second weight at roughly one third of capacity. Record both readings; a shift larger than the permitted error at that load means the instrument needs service, not another calibration.

    Does the ST-500S come with a manual?

    Yes — every unit ships with the Precision operation manual, and the setup, calibration and troubleshooting steps for this class of instrument are summarised on this page so you can commission it without waiting for documentation.

    Where can I buy the ST-500S in the USA?

    Order from mnmscales.com or allscalesusa.com — both ship from the United States with free fast mainland shipping. Call 832-290-3120 to confirm stock or get a quantity price.

    Customer reviews for ST-500S

    No reviews yet. Be the first to review this product.

    Comparable crane scales

    Other crane scales in the same class — compare capacity and readability before you commit.