Back to all A&D scales
    250 LB Calibrated Crane Scale Tension / Compression 250 LB Calibrated accuracy 0.02 LB

    250 LB Calibrated Crane Scale Tension / Compression 250 LB Calibrated accuracy 0.02 LB

    $395.00

    $249.00

    On Sale

    MSRP $395.00 — you save $146.00 (37% off)

    Crane Scale 250 lb 0.02 lb accuracy, Peak Hold

    Tension and compression scale
    S type load cell with Digital indicator
    Please note, this is a general picture
    • CALIBRATED AND READY TO USE RIGHT OUT OF THE BOX.
    • 250 LBS x 0.02 LB
    • Power supply and rechargeable battery


    1) S Type load cell Alloy steel

    1) LED indicator built in rechargeable battery and power supply

    2) Eye bolts

    Calibrated, ready to use out of box

    Digital indicator (readout)

    Accurate and Fast Response Time Indicator
    Plastic Enclosure

    • Plastic enclosure with mounting bracket and hardware
    • 1″ LED or LCD display with backlight
    • Functions: Zero, gross, net, accumulation, printing, counting, check weighing, auto-hold
    • Units: lb/kg selectable
    • RS-232 output
    • Ability to modify gravity based on different geographical locations
    • Drives up to 8 350ohm load cells
    • 6V Rechargeable battery

    LED 6-digits, 1″ with backlight
    Key 5 double function, flexible membrane
    Housing Plastic
    Mounting Desk-top, Wall, Column, Adjustable Angle
    Accuracy 6000e, max:30,000d; resolution 0.3uV/e

    We have this system in variety of different capacities :150, 200, 250, 500, 750, 1000, 2000, 3000, 5000, 10,000, 15,000 & 20,000 LB please visit our eBay store. Also we have them with different models and different brands indicator.

    Any questions please contact

    Why buy from EK1200i.com

    • Authorized dealer since 1998 — new, factory-sealed equipment with the full manufacturer warranty
    • Free fast shipping within the mainland USA
    • In-house NIST-traceable calibration available before shipment on request
    • Live phone and email support from working scale technicians in Cypress, Texas
    • Full-service calibration and repair lab for the life of your scale

    Specifications are published by the manufacturer and may change without notice. Contact us if you need a current datasheet or help matching a model to your application.

    Request Quote
    Authorized A&D Dealer
    Free Mainland US Shipping
    Expert Support

    Need bulk pricing? Contact us for special pricing on volume orders.

    Specifications

    Manufacturer
    MNM Scales
    Model
    250 LB
    Instrument class
    Crane scale
    Capacity
    250 lb
    SKU / Part number
    MNMSC-250LBCALIBRATE-250LB
    Price (USD)
    $249.00
    Availability
    In stock — ships from the USA
    Shipping
    Free ground shipping, mainland USA
    Warranty
    Full manufacturer warranty, registered to the buyer
    Calibration
    NIST-traceable, performed in Cypress, TX

    Capacity in other units

    Grams (g)
    113,398.093
    Kilograms (kg)
    113.3981
    Pounds (lb)
    250
    Ounces (oz)
    4,000
    Troy ounces (ozt)
    3,645.833
    Carats (ct)
    566,990.5

    What is a crane scale, and how does this one work?

    A crane scale is a suspended weighing device fitted between a lifting hook and its load, using a shackle-and-hook assembly with an internal load cell in tension. The 250 LB is rated to 250 lb. Because it is part of the lifting path, a crane scale is a load-bearing rigging component and is governed by lifting-safety practice, not just weighing accuracy.

    Load is carried through a hardened steel body containing an S-type or tension load cell. Strain gauges bonded to the cell's flexure change resistance as the steel elongates under tension; a Wheatstone bridge converts this to a millivolt signal proportional to load, which the indicator scales to engineering units. Housings are typically cast or machined alloy rated to a working load limit with a design safety factor of 4:1 or 5:1 to ultimate strength.

    Where the 250 LB is used

    • •Steel service centres and metal recycling: coil, bundle, and bale weighing
    • •Ports, shipyards, and heavy fabrication
    • •Scrap and waste handling with grapple or magnet attachments
    • •Agricultural livestock and bulk-bag weighing
    • •Proof-load testing and rigging verification

    Getting accurate results

    • •Never stand or work under a suspended load; read weight from a remote display or from the side.
    • •Let the load stop swinging before reading — dynamic loading can momentarily exceed static weight by a large margin during acceleration or shock.
    • •Zero the scale with the empty rigging (slings, spreader bar, chains) attached so the reading is net load.
    • •Inspect the hook throat opening, latch, and body for deformation before each shift. A hook whose throat has opened more than 15% must be removed from service.
    • •Re-verify calibration annually, or after any suspected overload or drop.

    Frequently asked questions about the 250 LB

    What are the capacity and readability of the 250 LB?

    The 250 LB is rated to 250 lb. Subtract the mass of any container or fixture from capacity to get your usable weighing range, because tare does not add capacity back.

    What test weight is needed to calibrate the 250 LB?

    A certified weight at or near full capacity with a tolerance no greater than one third of the smallest division, per NIST Handbook 105-1. That is ASTM E617 Class 1 or Class 2 for laboratory resolutions and Class 4 or 6 for industrial capacities. We stock certified weights and can supply the matching class with the instrument.

    How often should the 250 LB be calibrated?

    Annually for general commercial and industrial use, semi-annually or quarterly under ISO 9001, GMP or HACCP, and immediately after any relocation, suspected overload or impact. Legal-for-trade devices additionally follow the inspection cycle set by the local weights-and-measures jurisdiction.

    Is the 250 LB legal for trade?

    A scale that determines the price a customer pays must carry an NTEP Certificate of Conformance and be sealed by your state or local weights-and-measures authority. Laboratory-grade accuracy alone does not confer legal-for-trade status, and certification is lost if the seal is broken or the device is moved without re-verification. Ask us to confirm the NTEP number before ordering if money will change hands based on the weight.

    What is the difference between readability and accuracy?

    Readability is the smallest increment the display can show. Accuracy is how close a reading is to true mass and is limited by readability, repeatability (the standard deviation of repeated identical loads) and linearity (deviation from a straight line across the range) taken together.

    How fast does the 250 LB ship, and can it be repaired?

    In-stock units ship the same or next business day from Cypress, Texas, with free ground delivery to the mainland USA in 1–5 business days. Out of warranty, the common failure points on this class of instrument — load cell or force-restoration coil, keypad membrane, display ribbon and power supply — are all serviceable, and we perform the repair plus a full recalibration in-house rather than returning the unit to the manufacturer.

    250 LB manual summary and troubleshooting

    Unpacking and installation

    Inspect the hook, shackle and load pin for deformation or cracks before the first lift. Fit only shackles of the specified grade, charge the battery fully, and confirm the remote transmitter pairs with the display.

    Calibration and verification

    Calibrate in tension with a certified load or proving ring at a load near working capacity. Never exceed the rated working load limit; the safe working load of the weakest component in the rigging governs.

    Error codes and symptoms

    SymptomCause and remedy
    Reading will not stabiliseLoad is still swinging. Allow it to settle; do not read a moving load.
    Remote display drops outBattery low or out of line-of-sight range. Replace batteries and reduce obstruction.
    Zero shifts between liftsRigging left attached in the zero reading, or hook damage. Re-zero with rigging in place and inspect the hook.

    Care and re-verification

    Log every lift, inspect the load pin and hook regularly, and have the unit recertified annually.

    Need the printed PDF? Call 832-290-3120 and we will email the exact manual revision for your serial number. See also the manual & documentation library.

    Customer reviews for 250 LB

    No reviews yet. Be the first to review this product.