
Analytical Balance GR-120 Series w / Internal Calibration Weights. 120 x 0.1mg
$1998.00
Analytical balances read to 0.1 mg or finer inside a draft shield, for analytical chemistry, pharmacy and forensic work. Internal calibration and a stable bench are essential.
At a glance
- Model: GR-120
- Brand: MNM Scales
- Category: Analytical Balance
Not sure this is the right model for your application? Our technicians match scales to real-world jobs every day and will confirm capacity, readability and legal-for-trade requirements before you order.
Why buy from EK1200i.com
- Authorized dealer since 1998 — new, factory-sealed equipment with the full manufacturer warranty
- Free fast shipping within the mainland USA
- In-house NIST-traceable calibration available before shipment on request
- Live phone and email support from working scale technicians in Cypress, Texas
- Full-service calibration and repair lab for the life of your scale
Specifications are published by the manufacturer and may change without notice. Contact us if you need a current datasheet or help matching a model to your application.
Need bulk pricing? Contact us for special pricing on volume orders.
Specifications
- Manufacturer
- MNM Scales
- Model
- GR-120
- Instrument class
- Calibration test weight
- Capacity
- 0.1 g
- SKU / Part number
- MNMSC-GR-120-01
- Price (USD)
- $1998.00
- Availability
- In stock — ships from the USA
- Shipping
- Free ground shipping, mainland USA
- Warranty
- Full manufacturer warranty, registered to the buyer
- Calibration
- NIST-traceable, performed in Cypress, TX
Capacity in other units
- Grams (g)
- 0.1
- Kilograms (kg)
- 0.0001
- Pounds (lb)
- 0
- Ounces (oz)
- 0
- Troy ounces (ozt)
- 0.003
- Carats (ct)
- 0.5
What is a calibration test weight, and how does this one work?
A calibration test weight is a mass standard of known value and certified tolerance used to verify and adjust a scale. This item is a 0.1 g standard. US weights are classified under ASTM E617 (Class 0 through Class 7) and internationally under OIML R111 (E1, E2, F1, F2, M1 and below), with tolerance tightening as the class number decreases.
A test weight is manufactured from stainless steel or cast iron to a precise mass and issued with a calibration certificate traceable to a national metrology institute such as NIST. Applying it to a scale lets you measure span error directly. The certificate is the product: an uncertified weight of the same nominal mass proves nothing.
Where the GR-120 is used
- •Routine scale verification in labs, production, and retail
- •ISO 9001, GMP, and HACCP compliance records
- •Weights-and-measures self-checks before official inspection
- •Service technician field kits
Getting accurate results
- •Never touch a precision weight with bare hands; use the supplied tongs or lint-free gloves.
- •Store in the fitted case at stable room temperature; let weights acclimatise for at least an hour before use.
- •Calibrate the scale at or near full capacity, then verify linearity at mid-range with a second weight.
- •Log every calibration with date, weight ID, certificate number, and result — this is what an auditor will ask for.
Frequently asked questions about the GR-120
What are the capacity and readability of the GR-120?
The GR-120 is rated to 0.1 g. Subtract the mass of any container or fixture from capacity to get your usable weighing range, because tare does not add capacity back.
What test weight is needed to calibrate the GR-120?
A certified weight at or near full capacity with a tolerance no greater than one third of the smallest division, per NIST Handbook 105-1. That is ASTM E617 Class 1 or Class 2 for laboratory resolutions and Class 4 or 6 for industrial capacities. We stock certified weights and can supply the matching class with the instrument.
How often should the GR-120 be calibrated?
Annually for general commercial and industrial use, semi-annually or quarterly under ISO 9001, GMP or HACCP, and immediately after any relocation, suspected overload or impact. Legal-for-trade devices additionally follow the inspection cycle set by the local weights-and-measures jurisdiction.
Is the GR-120 legal for trade?
A scale that determines the price a customer pays must carry an NTEP Certificate of Conformance and be sealed by your state or local weights-and-measures authority. Laboratory-grade accuracy alone does not confer legal-for-trade status, and certification is lost if the seal is broken or the device is moved without re-verification. Ask us to confirm the NTEP number before ordering if money will change hands based on the weight.
What is the difference between readability and accuracy?
Readability is the smallest increment the display can show. Accuracy is how close a reading is to true mass and is limited by readability, repeatability (the standard deviation of repeated identical loads) and linearity (deviation from a straight line across the range) taken together.
How fast does the GR-120 ship, and can it be repaired?
In-stock units ship the same or next business day from Cypress, Texas, with free ground delivery to the mainland USA in 1–5 business days. Out of warranty, the common failure points on this class of instrument — load cell or force-restoration coil, keypad membrane, display ribbon and power supply — are all serviceable, and we perform the repair plus a full recalibration in-house rather than returning the unit to the manufacturer.
GR-120 manual summary and troubleshooting
Unpacking and installation
Unpack on the bench where the instrument will live, fit the platter or pan, and connect the supplied adapter. Level the instrument using the feet until the bubble is centred, then let it power up and warm through before the first weighing.
Calibration and verification
Run the span calibration routine with a certified test weight at or near full capacity, then verify with a second weight near one third of capacity. Record both readings and the date in a calibration log.
Error codes and symptoms
| Symptom | Cause and remedy |
|---|---|
| Unstable / flashing reading | Air movement, vibration or an unlevel surface. Move away from HVAC vents and doors, level the bubble, and let the load settle before reading. |
| Over-capacity indication (E, EEEE, or ---- ) | Applied load exceeds capacity, or the platter is fouled. Remove the load, check nothing is trapped under the platter, then re-zero. |
| Will not zero at power-up | Something is resting on the pan, or the zero range was exceeded. Clear the pan and power-cycle. |
| Calibration fails or rejects the weight | Wrong nominal mass entered, weight out of tolerance, or the instrument was not warmed up. Confirm the certified value and repeat after warm-up. |
| Drifting reading over minutes | Thermal drift or static. Allow full warm-up, ground the instrument, and use an anti-static device for powders. |
Care and re-verification
Keep the platter clean and dry, avoid shock loading, store certified test weights in their case and re-verify after any move.
Need the printed PDF? Call 832-290-3120 and we will email the exact manual revision for your serial number. See also the manual & documentation library.
Customer reviews for GR-120
No reviews yet. Be the first to review this product.