Back to all A&D scales
    Brecknell 430-30 LB Portion Food Scale

    Brecknell 430-30 LB Portion Food Scale

    $129.00

    Brecknell 430-30 – Food Scale

    The Brecknell 430-30 portion control scale has a capacity of 30 lbs (15 kg) with a readability of 0.002 lbs (0.0001 kg) and has a 10.3 x 8 inch pan size. Designed for speed and efficiency with limited operator training required. Ideal for use in grocery stores, delis, bakeries, yogurt shops, restaurants, catering and candy stores. This scale has been designed to be very simple to operate with two main scale modes. General Weighing Mode: Gives the operator an easy-to-read large clear display which can be quickly tared off in between each ingredient. Check Weighing Mode: Ideal for repetitive weighing applications. It can easily be set so the operator can quickly tell if the weight is within tolerance. The display turns orange when under weight, turns green with acceptable weight and turns red when over weight. Easy-to-Use Keys: Two operator keys makes the scale very easy to set up with minimal training requirements. The base is constructed of ABS plastic, which provides outstanding protection for daily usage and is fitted with removable food grade stainless steel pan for easy cleaning. A wipe down plastic cover comes standard to protect the display, keyboard and housing from dust and food particles. The 430 comes with a large easy-to-read LCD display with changeable backlight to indicate when the scale is within a set weight tolerance: orange for under, green for accept and red for over. An audio buzzer can be set to indicate when the scale is in or outside the acceptable weight tolerance.

    Special Features:

    • Functionality – Fast and accurate with simple-to-use under, over, accept check weighing features
    • Construction – ABS plastic housing with food grade 304 stainless steel weight platter
    • Display – Large 1.4 x 4 inch / 100 mm x 35 mm easy-to-read backlit LCD display with 1 inch / 25 mm high digits and easy-to-view under, accept and over color changing backlight
    • Power – AC power adapter (included) and built-in rechargeable battery with up to 60 hours of battery life
    • Simple to Operate – Two easy-to-use operator keys (Tare/Unit, Zero) keeps training to a minimum
    • 1 year warranty

    Specifications:
    Brecknell – 430-30
    Capacity 30 lbs (15 kg)
    Readability 0.002 lbs (0.0001 kg)
    Pan Size 10.3 x 8 inches
    Accuracy 0.03% at full load
    Units lb, kg
    Main Functionality General weighing and check weighing with color changing backlight and audio under, accept and over buzzer
    Display Large 1.4 x 4 inch (35 x 100 mm) LCD display with 5 1 inch (25 mm) high digits with color changing backlight (orange: under, green: accept, red: over)
    Operator Keys Tare/Unit and Zero
    Power AC power adapter (included) along with a built-in rechargeable lead acid battery
    Battery Life Up to 60 hours without backlight
    Tare 100%
    Dimensions (L x W x H) 12.3 x 10.3 x 4.3 inches (131 x 263 x 109 mm)
    Weight 6.8 lbs (3.1 kg)
    Shipping Dimensions (L x W x H) 14.4 x 13.2 x 7.5 inches (365 x 335 x 190 mm)
    Shipping Weight 7.7 lbs (3.5 kg)
    Certifications CE, RoHS 2

    Why buy from EK1200i.com

    • Authorized dealer since 1998 — new, factory-sealed equipment with the full manufacturer warranty
    • Free fast shipping within the mainland USA
    • In-house NIST-traceable calibration available before shipment on request
    • Live phone and email support from working scale technicians in Cypress, Texas
    • Full-service calibration and repair lab for the life of your scale

    Specifications are published by the manufacturer and may change without notice. Contact us if you need a current datasheet or help matching a model to your application.

    Request Quote
    Authorized A&D Dealer
    Free Mainland US Shipping
    Expert Support

    Need bulk pricing? Contact us for special pricing on volume orders.

    Specifications

    Manufacturer
    Brecknell
    Model
    Brecknell 430-30
    Instrument class
    Bench scale
    Capacity
    30 lb
    SKU / Part number
    BRECK-BRECKNELL43030-30LB
    Price (USD)
    $129.00
    Availability
    In stock — ships from the USA
    Shipping
    Free ground shipping, mainland USA
    Warranty
    Full manufacturer warranty, registered to the buyer
    Calibration
    NIST-traceable, performed in Cypress, TX

    Capacity in other units

    Grams (g)
    13,607.771
    Kilograms (kg)
    13.6078
    Pounds (lb)
    30
    Ounces (oz)
    480
    Troy ounces (ozt)
    437.5
    Carats (ct)
    68,038.9

    What is a bench scale, and how does this one work?

    A bench scale is a mid-capacity platform scale designed to sit on a work surface, typically covering 5 lb to 300 lb with a stainless or painted-steel platter. The Brecknell 430-30 is rated to 30 lb. It is the standard instrument for shipping, receiving, portioning, and checkweighing.

    Most bench scales use a single-point aluminium or stainless load cell mounted under the centre of the platter. The cell is corner-load compensated during manufacture so a parcel placed at any corner of the platform reads the same. The indicator applies filtering (digital averaging) to reject vibration, which is why a heavier filter setting gives a steadier but slower reading.

    Where the Brecknell 430-30 is used

    • •Shipping and receiving, parcel and freight rating
    • •Food portioning and ingredient batching
    • •Checkweighing on packaging lines
    • •Retail back-of-house and inventory control
    • •Laboratory and industrial general-purpose weighing

    Getting accurate results

    • •Place the scale on a rigid, level surface; a flexing table introduces reading instability that no filter setting will fix.
    • •Calibrate with a weight at or near capacity, and verify at mid-range afterwards to check linearity.
    • •Check corner (shift) error quarterly: place the same test weight at each corner of the platter; readings should agree within one division.
    • •Keep the platter clean underneath — debris bridging the platter to the base creates a mechanical shunt and false low readings.

    Frequently asked questions about the Brecknell 430-30

    What are the capacity and readability of the Brecknell 430-30?

    The Brecknell 430-30 is rated to 30 lb. Subtract the mass of any container or fixture from capacity to get your usable weighing range, because tare does not add capacity back.

    What test weight is needed to calibrate the Brecknell 430-30?

    A certified weight at or near full capacity with a tolerance no greater than one third of the smallest division, per NIST Handbook 105-1. That is ASTM E617 Class 1 or Class 2 for laboratory resolutions and Class 4 or 6 for industrial capacities. We stock certified weights and can supply the matching class with the instrument.

    How often should the Brecknell 430-30 be calibrated?

    Annually for general commercial and industrial use, semi-annually or quarterly under ISO 9001, GMP or HACCP, and immediately after any relocation, suspected overload or impact. Legal-for-trade devices additionally follow the inspection cycle set by the local weights-and-measures jurisdiction.

    Is the Brecknell 430-30 legal for trade?

    A scale that determines the price a customer pays must carry an NTEP Certificate of Conformance and be sealed by your state or local weights-and-measures authority. Laboratory-grade accuracy alone does not confer legal-for-trade status, and certification is lost if the seal is broken or the device is moved without re-verification. Ask us to confirm the NTEP number before ordering if money will change hands based on the weight.

    What is the difference between readability and accuracy?

    Readability is the smallest increment the display can show. Accuracy is how close a reading is to true mass and is limited by readability, repeatability (the standard deviation of repeated identical loads) and linearity (deviation from a straight line across the range) taken together.

    How fast does the Brecknell 430-30 ship, and can it be repaired?

    In-stock units ship the same or next business day from Cypress, Texas, with free ground delivery to the mainland USA in 1–5 business days. Out of warranty, the common failure points on this class of instrument — load cell or force-restoration coil, keypad membrane, display ribbon and power supply — are all serviceable, and we perform the repair plus a full recalibration in-house rather than returning the unit to the manufacturer.

    Brecknell 430-30 manual summary and troubleshooting

    Unpacking and installation

    Unpack on the bench where the instrument will live, fit the platter or pan, and connect the supplied adapter. Level the instrument using the feet until the bubble is centred, then let it power up and warm through before the first weighing.

    Calibration and verification

    Run the span calibration routine with a certified test weight at or near full capacity, then verify with a second weight near one third of capacity. Record both readings and the date in a calibration log.

    Error codes and symptoms

    SymptomCause and remedy
    Unstable / flashing readingAir movement, vibration or an unlevel surface. Move away from HVAC vents and doors, level the bubble, and let the load settle before reading.
    Over-capacity indication (E, EEEE, or ---- )Applied load exceeds capacity, or the platter is fouled. Remove the load, check nothing is trapped under the platter, then re-zero.
    Will not zero at power-upSomething is resting on the pan, or the zero range was exceeded. Clear the pan and power-cycle.
    Calibration fails or rejects the weightWrong nominal mass entered, weight out of tolerance, or the instrument was not warmed up. Confirm the certified value and repeat after warm-up.
    Drifting reading over minutesThermal drift or static. Allow full warm-up, ground the instrument, and use an anti-static device for powders.

    Care and re-verification

    Keep the platter clean and dry, avoid shock loading, store certified test weights in their case and re-verify after any move.

    Need the printed PDF? The official Avery Weigh-Tronix / Brecknell manual library is at Avery Weigh-Tronix / Brecknell documentation, or call 832-290-3120 and we will email the exact revision for your serial number. See also the manual & documentation library.

    Customer reviews for Brecknell 430-30

    No reviews yet. Be the first to review this product.