
Cardinal Detecto Washdown Indicator 190 Storm
$749.00
Overview
Built for extreme-use applications in the weighing industry, the 190 STORM’s IP69K-rated polycarbonate enclosure withstands high-temperature (up to 176º F / 80º C), high-pressure wash downs (1450 PSI). The 190 STORM features capacitive touch keys, 1-inch-high clearly visible LCD digits, built-in RS232 communications port, and versatile power options: AC, DC, and rechargeable battery.
The 190 STORM’s bright, vivid display changes color automatically as the pre-assigned target weights are reached. The operator knows immediately when they’ve reached the acceptable weight range based on the amber, green, or red color changes for UNDER, ACCEPT, or OVER weights. NTEP, OIML, and Measurement Canada.
Features
- 1 RS232 Serial Port
- 1-in-high LCD
- Capacitive Touch Keys
- ColorZONE Checkweighing
- IP69K-Rated Washdown
- NTEP Legal for Trade
- OIML Certified
- Ultra-Tough Polycarbonate Enclosure
Specifications
Power Requirements: 100 to 240 VAC (50/60 Hz) at 0.4A Max. / 190DC: 10.5 to 30 VDC 1.0A Max.
Enclosure Type: Polycarbonate and ABS enclosure, IP69K-rated wall or desk-mount
Enclosure Size: 9.4 in W x 6.4 in H x 3.7 in D / 239 mm W x 163 mm H x 93 mm D
Display: Six digit, seven segment, 1.0 in high backlit LCD
Transducer Excitation: 5.18 VDC
Signal Input Range: 0.5 mV min. to 40 mV max. (with dead load boost)
Number of Load Cells: 6 each, 350 OHM minimum resistance
Load Cell Cable Length: 1500 feet maximum / 30 feet maximum without sense lines (Consult factory for other requirements
Division Value: 1, 2, or 5 x 10, 1, 0.1, 0.01, 0.001 commercial / 0 to 99, non-commercial
Sensitivity (NON-COMMERCIAL): 0.15 uV/e
Sensitivity (COMMERCIAL): 100 to 10,000 (Class III/IIIL/IIIHD)
Internal Resolution: 1 part in 16,777,216
Tare Capacity: Scale Capacity
Sample Rate: 1 to 100 samples per second, selectable
Auto Zero Range: 0.5 or 1 through 9 divisions
Weighing Units: Pounds, Ounces, Kilograms, Grams
Keypad: Color Coded Capacitive Touch type, 7 keys
Standard I/O: 1 bi-directional RS232 serial
NTEP Approval: 10-084
OIML: R76/1992-DK3-11.05
Measurement Canada: AM-5804
Enclosure IP Rating: IP69K
Operating Environment: Temperature: 14 to 104 ºF (-10 to +40 ºC) / Humidity: 90% non-condensing (maximum)
Optional Battery Charge Time: 6 hours
Optional Rechargeable Battery Continuous Operation Run Times: Running single load cell – 92 hours with NO backlight / 83 hours with BLUE backlight / 48 hours with RED backlight / 48 hours with PINK backlight / 45 hours with GREEN backlight / 41 hours with YELLOW backlight / Battery life will be extended with SLEEP and AUTO-OFF operation set
Why buy from EK1200i.com
- Authorized dealer since 1998 — new, factory-sealed equipment with the full manufacturer warranty
- Free fast shipping within the mainland USA
- In-house NIST-traceable calibration available before shipment on request
- Live phone and email support from working scale technicians in Cypress, Texas
- Full-service calibration and repair lab for the life of your scale
Specifications are published by the manufacturer and may change without notice. Contact us if you need a current datasheet or help matching a model to your application.
Need bulk pricing? Contact us for special pricing on volume orders.
Specifications
- Manufacturer
- Cardinal
- Model
- Cardinal Detecto
- Instrument class
- Scale accessory
- SKU / Part number
- CARDI-CARDINALDETECT
- Price (USD)
- $749.00
- Availability
- In stock — ships from the USA
- Shipping
- Free ground shipping, mainland USA
- Warranty
- Full manufacturer warranty, registered to the buyer
- Calibration
- NIST-traceable, performed in Cypress, TX
What is a scale accessory, and how does this one work?
Cardinal Detecto is a scale accessory or replacement part. Genuine manufacturer parts matter more on weighing equipment than on most machinery, because a substituted pan, foot, or draft shield changes the mechanical load path and therefore the calibration.
Weighing accessories fall into three groups: mechanical parts that contact the load path (pans, hooks, draft shields, feet), interface hardware (RS-232 and USB adapters, printers, remote displays), and consumables (paper rolls, dust covers, batteries). Anything in the first group should be replaced with an OEM part and followed by recalibration.
Where the Cardinal Detecto is used
- •Preventive maintenance and spares stocking
- •Adding data output to an existing scale
- •Restoring a scale after damage rather than replacing it
Getting accurate results
- •Record the part number from the scale's rating plate rather than from the model name alone; sub-variants are common.
- •Keep a spare dust cover and paper roll on hand for production scales; downtime usually comes from consumables.
- •Verify calibration after any part replacement and keep the record.
Frequently asked questions about the Cardinal Detecto
What are the capacity and readability of the Cardinal Detecto?
Capacity and readability for the Cardinal Detecto are listed in the specification table above.
What test weight is needed to calibrate the Cardinal Detecto?
A certified weight at or near full capacity with a tolerance no greater than one third of the smallest division, per NIST Handbook 105-1. That is ASTM E617 Class 1 or Class 2 for laboratory resolutions and Class 4 or 6 for industrial capacities. We stock certified weights and can supply the matching class with the instrument.
How often should the Cardinal Detecto be calibrated?
Annually for general commercial and industrial use, semi-annually or quarterly under ISO 9001, GMP or HACCP, and immediately after any relocation, suspected overload or impact. Legal-for-trade devices additionally follow the inspection cycle set by the local weights-and-measures jurisdiction.
Is the Cardinal Detecto legal for trade?
A scale that determines the price a customer pays must carry an NTEP Certificate of Conformance and be sealed by your state or local weights-and-measures authority. Laboratory-grade accuracy alone does not confer legal-for-trade status, and certification is lost if the seal is broken or the device is moved without re-verification. Ask us to confirm the NTEP number before ordering if money will change hands based on the weight.
What is the difference between readability and accuracy?
Readability is the smallest increment the display can show. Accuracy is how close a reading is to true mass and is limited by readability, repeatability (the standard deviation of repeated identical loads) and linearity (deviation from a straight line across the range) taken together.
How fast does the Cardinal Detecto ship, and can it be repaired?
In-stock units ship the same or next business day from Cypress, Texas, with free ground delivery to the mainland USA in 1–5 business days. Out of warranty, the common failure points on this class of instrument — load cell or force-restoration coil, keypad membrane, display ribbon and power supply — are all serviceable, and we perform the repair plus a full recalibration in-house rather than returning the unit to the manufacturer.
Cardinal Detecto manual summary and troubleshooting
Unpacking and installation
Unpack on the bench where the instrument will live, fit the platter or pan, and connect the supplied adapter. Level the instrument using the feet until the bubble is centred, then let it power up and warm through before the first weighing.
Calibration and verification
Run the span calibration routine with a certified test weight at or near full capacity, then verify with a second weight near one third of capacity. Record both readings and the date in a calibration log.
Error codes and symptoms
| Symptom | Cause and remedy |
|---|---|
| Unstable / flashing reading | Air movement, vibration or an unlevel surface. Move away from HVAC vents and doors, level the bubble, and let the load settle before reading. |
| Over-capacity indication (E, EEEE, or ---- ) | Applied load exceeds capacity, or the platter is fouled. Remove the load, check nothing is trapped under the platter, then re-zero. |
| Will not zero at power-up | Something is resting on the pan, or the zero range was exceeded. Clear the pan and power-cycle. |
| Calibration fails or rejects the weight | Wrong nominal mass entered, weight out of tolerance, or the instrument was not warmed up. Confirm the certified value and repeat after warm-up. |
| Drifting reading over minutes | Thermal drift or static. Allow full warm-up, ground the instrument, and use an anti-static device for powders. |
Care and re-verification
Keep the platter clean and dry, avoid shock loading, store certified test weights in their case and re-verify after any move.
Need the printed PDF? Call 832-290-3120 and we will email the exact manual revision for your serial number. See also the manual & documentation library.
Customer reviews for Cardinal Detecto
No reviews yet. Be the first to review this product.